873000

Well my friend gave me a bose 4th gen head unit for free , And the car came with an after market wiring harness , Could any one find me a diagram for a 4th gen bose head unit , 1998 october to be specsific.

Check in the 4th gen forum's and couldent find **** and even asked only got one responce and it wasent what i was looking for...

es_amixam

iTrader: (9)

Go to Best Buy, get the 1995-up radio wiring harness(the one which plugs into the back of the radio, not the one for the car). It has all the wires marked+color coded.

Big_E-Dog

iTrader: (14)

u better get those sprakers as well or i dont think itl work...

Yayomax

It will work but you have to use your own amp and wire the Bose HU to it, which is what I did with my 2nd gen.

Yayomax

It will work but you have to use your own amp and wire the Bose HU to it, which is what I did with my 2nd gen. View it here: http://www.cardomain.com/ride/2251131/1.
I got it cause My Kenwood HU and seperate EQ was stolen. I needed something low key and the way I needed it to sound

Another thing, the impedence of the Bose speakers I know are 6 ohms. The ones I were using were 4 ohms. There wasn't much volume which is why I use a 600 watt amp to power my 8 speakers I have set up. An additional amp was used to power my 2 subs. If 6 ohm speakers were used, maybe there would have been more volume. Any other questions just ask.

^^^My bad for the double post^^^

873000

How exatcly would i hook the HU up to an amp , The car came with amp power wire hooked up .

I have that same hu , And i got a sony 600w amp.

berts689

that wire is just to give it power, there a re other cable4s to route in order to hookup the AMp itself to the unit.

8730000

Yeah but how would i hook it up to the speakers

8730000

Those two aux imput's is how i would put sound into the amp...

How could i convert the output for the speaker's to the amp?


and yayo do you have a wiring diagram for the 98 hu ?

the one's i have are impossible to understand...

Yayomax

The output would be accomplished by way of those line level outputs. Still confused? When you say wiring diagram, do you need the color references for the wires; cause I had one before. I'll look for it.

JSutter

iTrader: (46)

Do you need the plugs for the back of the Bose? I have them, and the single bose amp from a G20 (setup like a 5th gen) too if you are feeling frisky with the wiring. I also have the Bose 6.5" front speakers and tweeters from the G20.

If you have an aftermarket amp you can get a line converter to bring the Bose pre amp signal up to line level.

8730000

im just going to sell the bose hu , It more than the a hassle i was looking for .... Im just going to go with a sony hu...

Yayomax

Has anyone noticed that his screenname as 873000 says banned. And now there's been posts under 8730000 screenname, which incidentally is now also banned? Oh boy, I smell a perma.

87300000

Well cutler keep's on banning me for no apparent reason...

I havent pissed any one off i dont understand , A while ago on some one installed a Nismo spoiler and he posted a pic of it , And i said it look's sick.

Maybe , he misunderstood what i ment ....

I wish he would stop pressing that damn ban button...

Yayomax

Maybe you should private message him/her because re-registering while banned is not the way to go. You ever read the ban log? Apparantly something is wrong. You don't wanna risk a blocked I.P. address.

Yayomax

Sorry to hear that. Well yes then sell it, so I can be the only one on the .org with a Bose HU in a 2nd gen. Albeit not the full Bose setup with speakers and all. But hell, mines sound better anyways

Cutler

iTrader: (3)

Asshat, you can't come back that's what permaban means. You will get IP banned if you keep up this crap....