Anyone Replace the Intermediate (Center) Exhaust Pipe?
Thread Starter
Member
Joined: May 2002
Posts: 184
Anyone Replace the Intermediate (Center) Exhaust Pipe?
This is the pipe between the cat and the header pipe, which has the flex section. Anyone know if there are studs or thru-bolts that hold the flanges? The cat side connections looks like studs which are threaded into the cat side flange and would have to be drilled or torched out. The head pipe side looks like thru bolts. I usually use a cutoff wheel on the thru bolts, remove them and replace with them new bolts. This won't work as easily on studs. Can anyone confirm? Any input on experience with a part brand fit?
This is the pipe between the cat and the header pipe, which has the flex section. Anyone know if there are studs or thru-bolts that hold the flanges? The cat side connections looks like studs which are threaded into the cat side flange and would have to be drilled or torched out. The head pipe side looks like thru bolts. I usually use a cutoff wheel on the thru bolts, remove them and replace with them new bolts. This won't work as easily on studs. Can anyone confirm? Any input on experience with a part brand fit?
if your maxima is untoughed its 17mm bolts and nuts, if some one modified it then your in trouble.
Thread
Thread Starter
Forum
Replies
Last Post
vingodine
5th Generation Classifieds (2000-2003)
45
May 21, 2016 12:46 PM
MaximaDrvr
7th Generation Maxima (2009-2015)
16
Aug 19, 2015 08:20 PM