International Wanted: 3rd Gen Calipers/Discs/Pads
06-20-2019, 11:01 AM
#1
Member
Thread Starter
Join Date: Dec 2015
Location: NE England
Posts: 126
Wanted: 3rd Gen Calipers/Discs/Pads
Hi guys,
The great news: After selling my '94 3rd Gen a couple of years ago, I've managed to get it back! Yay!
The bad news: It's failed it's annual UK MOT check on brakes. Without going to Rockauto, does anybody have any calipers (front and rear), discs and pads lying around gathering dust? Or is Rockauto the best place to go?
*Edit* It looks like the front calipers are available on Rockauto, but the rears could be where I struggle and need your help.
Cheers
Chris
The great news: After selling my '94 3rd Gen a couple of years ago, I've managed to get it back! Yay!
The bad news: It's failed it's annual UK MOT check on brakes. Without going to Rockauto, does anybody have any calipers (front and rear), discs and pads lying around gathering dust? Or is Rockauto the best place to go?
*Edit* It looks like the front calipers are available on Rockauto, but the rears could be where I struggle and need your help.
Cheers
Chris
Last edited by Geordie; 06-20-2019 at 11:18 AM.
05-03-2020, 12:09 PM
#2
I would suggest you upgrade to Q45 dual piston calipers....grind the caliper torque members to clear the rotors and grind a notch in the Brake pads mid-inner radius....Stopping power is incredible...The 3rd and 4th Gen both utilize the same bolt sizes to attach the caliper torque members. I'm running this setup on my 4th Gen and the brakes stop with ease...The other option is the 6th Gen Upgrade...The torque member knuckle bores will need to be increased 2 mm....
Thread
Thread Starter
Forum
Replies
Last Post
xX4DSCXx
1st-3rd Generations Classifieds (1981-1994)
1
04-07-2010 01:34 PM
98maxi
General Maxima Accessories (All Generations)
2
11-04-2009 05:50 AM