Brake distributor problem
#1
Brake distributor problem
Help!!!! I have an 89 SE with a leak in what appears to be a hydraulic distribution head (Not the master cylinder, but a box where all the brake lines go into it and then out). I can't find any source for parts and don't even know what to call it. One of the tubes is split and spewing brake fluid.
#3
Re: Brake distributor problem
Originally posted by dpbailey
Help!!!! I have an 89 SE with a leak in what appears to be a hydraulic distribution head (Not the master cylinder, but a box where all the brake lines go into it and then out). I can't find any source for parts and don't even know what to call it. One of the tubes is split and spewing brake fluid.
Help!!!! I have an 89 SE with a leak in what appears to be a hydraulic distribution head (Not the master cylinder, but a box where all the brake lines go into it and then out). I can't find any source for parts and don't even know what to call it. One of the tubes is split and spewing brake fluid.
Not hard to do really, Its heavy and sits on a bracket, I removed it from the bracket, some folks take it and the bracket out together. Just undo the brake lines, unplug wire harnesses, and either unbolt the pump from bracket or unbolt the bracket and remove, then put new one in and bleed the brakes. I had to bleed mine several times with a one man bleeder to get all the air out. Do a search for ABS pump too, you should find some info, thats what I did.
Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
hez8813
5th Generation Maxima (2000-2003)
11
03-12-2020 12:06 AM
bbsitum
4th Generation Maxima (1995-1999)
4
09-11-2015 04:55 PM