3rd Generation Maxima (1989-1994) Learn more about the 3rd Generation Maxima here.

Problem starting the car and putting on neutral only works.

Thread Tools
 
Search this Thread
 
Old 05-22-2003, 09:35 AM
  #1  
Newbie - Just Registered
Thread Starter
 
klimax's Avatar
 
Join Date: Oct 2002
Posts: 4
Problem starting the car and putting on neutral only works.

I have a nissan maxima 93 xe. It is an automatic transmission.
Having problems with starting the car. Whenever i turn on the ignition it doesn't start but all the sensor lights come up but the engine doesn't turn on. The only way i can start the engine is by puttting it on neutral and then turning the ignition again. The starter has been switched and battery is new. My mechanic himself doesn't know whats going on, does anybody have any suggestions? Thanks.
klimax is offline  
Old 05-22-2003, 11:06 AM
  #2  
Senior Member
iTrader: (1)
 
eric93SE's Avatar
 
Join Date: Mar 2001
Location: NY
Posts: 1,988
Sounds like your bushing on the shifter linkage broke/fell off. Its a common problem. You can buy both bushings from Nissan, around $4. One is located where the cable meets the tranny. The other is under the shifter, it can only be accessed from under the car, and its located above the cat convertor, the convertor does not have to be removed but there is a heat sheild above the cat that must be removed to access the linkage. Using ramps is the best way to get at that one.

good luck
eric93SE is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kjlouis
4th Generation Maxima (1995-1999)
11
11-24-2018 06:09 AM
acw
5th Generation Maxima (2000-2003)
10
08-13-2015 12:50 AM
Balkins
5th Generation Maxima (2000-2003)
1
08-12-2015 06:39 AM
mrgooch
8th Generation Maxima (2016-)
6
08-09-2015 11:00 AM
kirkhilles
5th Generation Maxima (2000-2003)
2
08-08-2015 10:53 AM



Quick Reply: Problem starting the car and putting on neutral only works.



All times are GMT -7. The time now is 11:51 PM.