so you want 3rd gen attention huh?
12-02-2003, 01:19 AM
#42
screw scoob
dango and new max... although I'm hesitant to let you be around dango... its alot of power/torque for a youngian
edit: ok, but durango needs new oil in both differientials, and full tranny flush, plus I need to put new stuff in the t-case (again) because my dad took it to a shop for some reason and they put normal crap back in it. Then maybe it's time for a shackle lift
oh yeah, might install a different tranny cooler, also a new filter for the tranny, and also coolant flush with 160* T-stat plus alittle die-grinder work on the intake
dango and new max... although I'm hesitant to let you be around dango... its alot of power/torque for a youngian
edit: ok, but durango needs new oil in both differientials, and full tranny flush, plus I need to put new stuff in the t-case (again) because my dad took it to a shop for some reason and they put normal crap back in it. Then maybe it's time for a shackle lift
oh yeah, might install a different tranny cooler, also a new filter for the tranny, and also coolant flush with 160* T-stat plus alittle die-grinder work on the intake
12-02-2003, 06:34 AM
#43
Originally Posted by davebond007
1 down, a few more to go.
get a good set of jack stands. the milk crates can go any minute and then you'll have a bigger mess.
carry on...
12-02-2003, 11:25 AM
#46
hahahahaahha
the jackstands are there, you just cant see them which is kind of funny because they are yellow.
the milk crates are just there to hold the spindles for me. I just find its easier/faster to use a milk crate or upside down bucket to hold calipers and spindles vs. using wire.
I dont think a milk crate could hold up the car, would have been cool to try with Jeff's parts car though
Thanks guys for keeping an eye our though
the jackstands are there, you just cant see them which is kind of funny because they are yellow.
the milk crates are just there to hold the spindles for me. I just find its easier/faster to use a milk crate or upside down bucket to hold calipers and spindles vs. using wire.
I dont think a milk crate could hold up the car, would have been cool to try with Jeff's parts car though
Thanks guys for keeping an eye our though
12-03-2003, 06:14 AM
#47
Originally Posted by MrGone
We need to get Matt and Jeffy's cars in there hehehhe 
maybe we should just make a 3rd gen calender?
Davebond =
maybe we should just make a 3rd gen calender?
Davebond =
12-03-2003, 11:57 AM
#52
I see skymax and jdwyer....
and I think nimso's wheels are Dixit's old ones.
funny thing though, klown and I were talking about semi old but new skool 3rd gen maxima.org and were talking about some of those guy's cars (and about Ryan's burnouts )
and I think nimso's wheels are Dixit's old ones.
funny thing though, klown and I were talking about semi old but new skool 3rd gen maxima.org and were talking about some of those guy's cars (and about Ryan's burnouts
)
Thread
Thread Starter
Forum
Replies
Last Post
pears
5th Generation Maxima (2000-2003)
15
09-18-2015 05:25 AM
ik95
7th Generation Maxima (2009-2015)
7
09-16-2015 08:11 PM