3rd Generation Maxima (1989-1994) Learn more about the 3rd Generation Maxima here.

Can't find the pcv valve..........

Thread Tools
 
Search this Thread
 
Old 03-07-2004, 02:34 PM
  #1  
Senior Member
Thread Starter
 
3rdgenmaxima's Avatar
 
Join Date: Sep 2003
Posts: 122
Can't find the pcv valve..........

I have a 94 se and i had my hood replaced last month, but i just realized that there is no catylist on it. I used some seafoam in the car and it runs so much better now, i also replaced my fuel filter too. I did all of this yesterday while i changed the oil and replaced my front brakes. All i had left to do was change out the pcv valve. And i don't have a clue to where it is at, i know this is an easy question and i could of found it if i had the catylist, but i don't and i tried to look everywhere for it and tried to search a little. So this is my last resort, someone help me out and tell me where it is at. Thank you.
3rdgenmaxima is offline  
Old 03-07-2004, 02:43 PM
  #2  
Member
 
portdave's Avatar
 
Join Date: May 2003
Posts: 130
Just below the intake plenum, near the firewall on the passenger side. You will see about 3 inches of black tubing coming off the PCV valve continuing under the back brackets that hold the intake plenum on. Hope that helps.

David
portdave is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bumpypickle
4th Generation Maxima (1995-1999)
10
09-20-2015 08:22 AM
pears
5th Generation Maxima (2000-2003)
15
09-18-2015 05:25 AM
Vistance
5th Generation Maxima (2000-2003)
17
09-17-2015 05:17 AM
adamgalazka
8th Generation Maxima (2016-)
4
09-08-2015 01:27 PM



Quick Reply: Can't find the pcv valve..........



All times are GMT -7. The time now is 11:57 PM.