Need your help! Can you vote for my car? It will only take 5 seconds
Thread Starter
NWP Engineering.com
iTrader: (128)
Joined: Jul 2001
Posts: 14,065
From: Walstonburg, NC
Originally Posted by bonzelite
aaron, have you considered cattman headers? or would that be irrelevant for drag?
Thanks again everybody for all your votes. I hope you can keep it up.
Thread Starter
NWP Engineering.com
iTrader: (128)
Joined: Jul 2001
Posts: 14,065
From: Walstonburg, NC
Originally Posted by MrGone
Find a custom exhaust shop and have them make you some 3 step or whatever they were called (I forgot) headers. They make the most power 

I forget the technical name, but basically you start out at the diameter that matches the port, use that for ~6" or so, then bump it up to the next size or two, go for maybe ~8" then go to the next size up or two and take that to the collector.
Sizes/lengths are dependant on the engine and engine configuration, it is not cheap but you can gain lots of power. You would probably not be able to keep the WSP though.
Sizes/lengths are dependant on the engine and engine configuration, it is not cheap but you can gain lots of power. You would probably not be able to keep the WSP though.
Thread Starter
NWP Engineering.com
iTrader: (128)
Joined: Jul 2001
Posts: 14,065
From: Walstonburg, NC
Originally Posted by MrGone
I forget the technical name, but basically you start out at the diameter that matches the port, use that for ~6" or so, then bump it up to the next size or two, go for maybe ~8" then go to the next size up or two and take that to the collector.
Sizes/lengths are dependant on the engine and engine configuration, it is not cheap but you can gain lots of power. You would probably not be able to keep the WSP though.
Sizes/lengths are dependant on the engine and engine configuration, it is not cheap but you can gain lots of power. You would probably not be able to keep the WSP though.
Thanks again Seyath for helping out so much. Chuck, usman, thank you. And I know there have been a LOT of people that have voted but not posted anything. Here's a "thank you" for those people.
Originally Posted by 94M@X
just voted again
track time .......... you could watch the movie gone in 60 seconds
first.
Thread Starter
NWP Engineering.com
iTrader: (128)
Joined: Jul 2001
Posts: 14,065
From: Walstonburg, NC
Originally Posted by silverlinekenne
just voted again for ya. If you win you must race my vg! est
track time .......... you could watch the movie gone in 60 seconds
first.
track time .......... you could watch the movie gone in 60 seconds
first.

Originally Posted by Aaron92SE
You want me to race your VG? It appears that you have a VE Maxima. Thanks for the votes.
then I did not no the diffrance) And about the race was just kidding. I have a gxe all the way with about 500lb of stereo equ. Just look at my home page. and
GOOD LUCK WE ALL HERE GOT YA BACK.
Thread Starter
NWP Engineering.com
iTrader: (128)
Joined: Jul 2001
Posts: 14,065
From: Walstonburg, NC
Thanks again. That Silverado truck is really worrying me. This morning before I left for work, I had 226 votes. Now, after work 9 hours later, I am at 235. This Silverado guy went from 115 to 137 in the same amount of time. He is REALLY closing the gap fast. I know he is a huge part of forums around the internet. So I bet he's posting in a big forum just like I did. So at the moment, it's Maxima.org against his Silverado or Chevy forum. If he keeps this up, which I know he will, he will really catch me by the end of the month.
I think I am going to have to expand to the General forum. But I am going to take a two week vacation coming soon and it will last until the end of this month. So I won't be online to keep the thread going. Maybe you 3rd gen guys can help a brotha out.
Thanks again.
*edit*
I just started a thread about this in the General Forum. I hope that some of you guys can keep this thread going while I'm on vacation from May 17th to June 1st. I will try my best to keep checking back in on my friend's computers, but it will be hard. Thank you SO much once again. Oh yeah, here's the thread:
http://forums.maxima.org/showthread.php?t=309974
*/edit*
I think I am going to have to expand to the General forum. But I am going to take a two week vacation coming soon and it will last until the end of this month. So I won't be online to keep the thread going. Maybe you 3rd gen guys can help a brotha out.
Thanks again.*edit*
I just started a thread about this in the General Forum. I hope that some of you guys can keep this thread going while I'm on vacation from May 17th to June 1st. I will try my best to keep checking back in on my friend's computers, but it will be hard. Thank you SO much once again. Oh yeah, here's the thread:
http://forums.maxima.org/showthread.php?t=309974
*/edit*
i will volunteer to be on the vote-for-aaron-committee. i really respect you for elevating the 3rd gen to drag competition. may 17. that is a monday? after the weekend you're gone for 2 weeks. i'll even vote again now while i am at it...
shiet. not midnite here yet.
everyone, remember the fortnight following the day of may 17.
shiet. not midnite here yet.
everyone, remember the fortnight following the day of may 17.
Thread Starter
NWP Engineering.com
iTrader: (128)
Joined: Jul 2001
Posts: 14,065
From: Walstonburg, NC
Originally Posted by bonzelite
i will volunteer to be on the vote-for-aaron-committee. i really respect you for elevating the 3rd gen to drag competition. may 17. that is a monday? after the weekend you're gone for 2 weeks. i'll even vote again now while i am at it...
shiet. not midnite here yet.
everyone, remember the fortnight following the day of may 17.
shiet. not midnite here yet.
everyone, remember the fortnight following the day of may 17.

Originally Posted by Aaron92SE
Hmm, you know what? I guess absolutely nothing. Ahhh, 'personal satisfaction' since you've helped out a fellow Maxima member. 
Thanks again everybody. That 1500 1/2 truck has gotten a LOT of votes overnight. I think he wants to be a contender.

Thanks again everybody. That 1500 1/2 truck has gotten a LOT of votes overnight. I think he wants to be a contender.

keep it going everyone! Have you voted today? I have twice once from
hear and at my uncles.
Thread Starter
NWP Engineering.com
iTrader: (128)
Joined: Jul 2001
Posts: 14,065
From: Walstonburg, NC
Originally Posted by bonzelite
is this in the general forum yet? if not, it should be to get maximum exposure.
I love how its says Nissan Maxima, and 286 votes, right under it is a chevy, under that a chevy and under that a chevy and under that a mercedes. Most of the other cars get under 100 votes. We can just make about anything get to the top. oh, and voted for you again.
Thread
Thread Starter
Forum
Replies
Last Post
Lakersallday24
6th Generation Maxima (2004-2008)
10
Jun 16, 2019 01:35 AM
FanaticMadMax
5th Generation Maxima (2000-2003)
7
Aug 10, 2015 08:55 PM




You show them Aaron. By the end of May you will have doubled the amount of voted the 4th gen got last month!
