VASHtheSTAMPEDE

alright, i found out that my window regulator has completely failed on the driver's door, (~insert sarcastic tone~)What! window trouble on a 3rd gen maxima, that's odd.
But, back to my question, The window is rolled completley down and i was told that you would have to pull it up manually to reach the regulator, is this true and if it is how could i do this with out damaging anything else inside my door.

Holla back!

DanNY

iTrader: (14)

if your regulator did break..you can just reach in and lift/push the glass up since it won't be under tension of the regulator.

BOB-O

Even if it is still connected and binding, once you get the panel off the door you can see what the problem is and disconnect the regulator.

Magnifico

it'll all become clear once you get the door panel off, and use craigs fAQ. if you need to get it up right now and you cant do it from above just take the door panel off and push it up from the bottom. it wont damage anything

dewmax007

ya, and a piece of lath, or 2x2 can be custom cut to hold it up to keep the thieves out...just why do i know this???

maxZ93

this happened to my 1993 max se, to the rear driver side door. unscrew the regulator and unscrew the screws attaching the regulator to the window slidy thing. lol slidy thing, anyways. i used a piece of wood to hold up my window temporarily, but then i installed my new regulator, it was a b i t c h. and it works awesome now