I was informed by a local shop that they do not make a cold air intake system for the SOHC motor because it already has the tubing. They said that there is an adaptor for it to change out the stock airbox into a cone filter if anyone is familiar with this and knows where i can get a good adaptor and if it comes with something to move the MAS with. Any help would be greatful.

 

ok Ebay has the adaptor. You can get them for like less than $10 bucks. I think jeff92se also sells them I cant remember if he does or not. IIRC place air make a whole cold air kit for the vg30e too. But its kinda high.Or you could do like some of us has done make your on kit less than $40 in parts. And Ive heard that the 92 accord kit would work with some mods to it.

 

Warpspeed also makes a cold air intake for the VG (SOHC).

 

You can get a MAF adaptor & cone filter to make a popcharger / hot air intake. To make a CAI, you need an additional pipe that will place the filter right inside the driver-side fender along with the adaptor & cone filter.

There are many sellers on eBay who sell the adapter & cone filter for the popcharger setup. For a CAI, you can either order one from Warpspeed Performance or try one of the hybrid solutions (Accord or Eclipse CAI w/ some minor cutting).

 

Be VERY careful with those ebay MAF adapters that claim it'll fit 3rd generation maximas. I bought one of them, and it did not fit at all. So it's pretty much a fancy paperweight right now. I got mine from Jeff92se when he was making them awhile back. Don't know if he still does or not.

 

i bought a carbuerator outlet plate for the tube that runs from carb cover to fenderwell it has a 3 inch outlet just angle it diagonaly and use 2 bolts and nuts and bolt it to ur existing maf. worked fine with a k&n cone filter. the adapter plate cost me about 3 dollars bolts and nuts were bought from lowes. hope it helps the plate was bought from autozone only color u can get them in is grey

 

Carb outlet plate?
you got any pics , because to me this doesn't sound right

 

93 accord cold air will probably fit ur budget better than the 200 + cold air from ws..

 

thanks for all of the replies guys i appreciate it i think i will go with one of the adaptors on ebay. see how that pans out. I was really impressed with all of the feedback this is my first post on this site.

 

along with the filter(pop charger) ull need the plate and 4 screws to fit the bolts..

 

I'm homosexual

 

Yep... I bought mine from eBay & they sent me an adaptor for a 300zx. I read that some just drilled the holes in the adaptor to make it fit but when I matched it with my MAF, it was just too short.

However, upon rotating it 45 degrees, it seems to fit, though only with 2 bolts holding it on diagonally. I've seen one other do the same thing & it seems strong enough for now.