door inserts
#3
I don't think he was talking about simply taking the door panel off. Taking the door panel off is a breeze.
Several people have done the inserts and re-upholstering them is a pain. (at least it was for me?)
The insert isn't a seperate peice from the panel - just looks like it is. So you can either re-upholster it from the front (good luck getting it to look professional tho), or you could do it the way I did - I ended up cutting the 'insert' area out and then wrapping it with the new material, then glued the 'insert' back into place. This may not be the way others did it, and I had very little upholstery experience, but this was the only way I could see to get the edges of the insert to have a clean, factory 'edge' when done.
It's not really that tough to do, just make sure you take your time and buy some high-quality spray adhesive (I used 3M spray).
I put a few pics at the bottom of page 6 on my site (they suck but....) - take a look - might help you decide how you want to approach this?
Good luck
Several people have done the inserts and re-upholstering them is a pain. (at least it was for me?)
The insert isn't a seperate peice from the panel - just looks like it is. So you can either re-upholster it from the front (good luck getting it to look professional tho), or you could do it the way I did - I ended up cutting the 'insert' area out and then wrapping it with the new material, then glued the 'insert' back into place. This may not be the way others did it, and I had very little upholstery experience, but this was the only way I could see to get the edges of the insert to have a clean, factory 'edge' when done.
It's not really that tough to do, just make sure you take your time and buy some high-quality spray adhesive (I used 3M spray).
I put a few pics at the bottom of page 6 on my site (they suck but....) - take a look - might help you decide how you want to approach this?
Good luck
#4
yea i know how to take the thing off....but yea my brother does upholstering for a living on airplanes so it is being profesionaly done with high quality leather ect...but thanks for telling me that it is not a seperate part that is what i wanted to know
Thread
Thread Starter
Forum
Replies
Last Post
REDinLV
7th Generation Maxima (2009-2015)
5
08-15-2024 12:30 AM
trsandrew
7th Generation Maxima (2009-2015)
17
04-08-2016 06:45 PM
magiconthetire
Audio and Electronics
2
10-26-2015 09:03 PM
trsandrew
Group Deals / Sponsors Forum
2
10-25-2015 02:47 PM