3rd Generation Maxima (1989-1994) Learn more about the 3rd Generation Maxima here.

anyone else ever encounter this with the rear calipers?

Thread Tools
 
Search this Thread
 
Old Jan 22, 2005 | 11:54 AM
  #1  
shavedmax's Avatar
Thread Starter
Senior Member
iTrader: (6)
 
Joined: Oct 2001
Posts: 3,093
From: ny
anyone else ever encounter this with the rear calipers?

so the pass side caliper on my 93 froze up, so i went and bought a reman from autobarn, put it on, and the thing leaks from the e brake levers. no big deal, **** happens, but they dont have any more in stock, so i have to drive another 30 min to get another one( keep in mind i am dooing this as it starts to snow, outside, and we're supposed to get a foot, so i really want to go this done like now. i get the other one, put it on, same thing!. now i've already changed one before, its not like i dont know how to bolt the thing on and bleed the system, but 2 calipers going bad?!. any ideas what could be wrong or should i just return it? to boot, i already turned in the core
Old Jan 22, 2005 | 12:07 PM
  #2  
Wiking's Avatar
Senior Member
 
Joined: Dec 2004
Posts: 4,323
From: EU Scandinavia
2 calipers did not 'go' bad - they were. Replace... but how u make sure the third?

Nice pic!
Old Jan 22, 2005 | 01:35 PM
  #3  
Matt93SE's Avatar
STFU n00b!
iTrader: (44)
 
Joined: Aug 2000
Posts: 18,087
From: Houston
That sucks man... go grab you another one and insist that it's another brand. sounds like the place that's rebuilding them isn't replacing that seal.
Old Jan 22, 2005 | 01:55 PM
  #4  
shavedmax's Avatar
Thread Starter
Senior Member
iTrader: (6)
 
Joined: Oct 2001
Posts: 3,093
From: ny
actually the seal looks like it's new. maybe theyre just not putting it in right, or it's the wrong seal, but by the time i go back theyll have another reman one in stock, no manufacturer info on it, so i dont think i can really ask for another place to do it since i dont know who made it. what sucks is that i cant even just return it since they have my core(it really doesnt matter, i have 2 other calipers i could use for cores, but its the point) maybe if i get them to refund me both the reman and the core ill order it from someone else.
Old Jan 22, 2005 | 06:01 PM
  #5  
internetautomar's Avatar
mod or sell?
iTrader: (30)
 
Joined: Sep 2003
Posts: 19,760
From: Skokie (look it up)
go to where you first bought the caliper and chances are your core is still sitting there waiting to be returned.

I do sell calipers too.
Old Jan 22, 2005 | 09:25 PM
  #6  
GreenMaxVE's Avatar
Member
 
Joined: Oct 2001
Posts: 137
I've never had a problem with the calipers I bought at Napa. FYI I think a rear caliper was around $80.
Old Jan 23, 2005 | 08:32 AM
  #7  
shavedmax's Avatar
Thread Starter
Senior Member
iTrader: (6)
 
Joined: Oct 2001
Posts: 3,093
From: ny
reason i went to autobarn is because they were the only ones that had it in stock. i have a napa up the block from me, personally i like to use autozone(go ahead and gimme crap over it, but they have a lifetime warrantee), but out of the 5 parts places i called they were the only one i could walk into and walk out with a caliper, and they were 80 bucks, somewhat more expensive than everyone else. i just wanted to get it done before it snowed, now it's unter a foot and a half of snow
Old Jan 24, 2005 | 12:01 PM
  #8  
D-sta's Avatar
Senior Member
iTrader: (6)
 
Joined: Dec 2001
Posts: 3,387
Maybe u should buy a gold caliper
Old Jan 24, 2005 | 12:18 PM
  #9  
Ninty-two-se's Avatar
Senior Member
 
Joined: Aug 2003
Posts: 484
I bought a caliper from advance autoparts that leaked like that... it was the rear passengers side... I returned it, got a new one and everything was fine. But it sucked because the store is like 30 min away and I had to make multiple trips and my car was off the road for the better part of a week... Got to drive the Z around though...so it all worked out in the end.
Old Jan 24, 2005 | 04:00 PM
  #10  
shavedmax's Avatar
Thread Starter
Senior Member
iTrader: (6)
 
Joined: Oct 2001
Posts: 3,093
From: ny
Originally Posted by D-sta
Maybe u should buy a gold caliper
where have you been stranger?

i went to autozone today to get another one. ill put it in tomorrow and just return the other one. i called and they said they still had my core
Old Jan 24, 2005 | 06:40 PM
  #11  
D-sta's Avatar
Senior Member
iTrader: (6)
 
Joined: Dec 2001
Posts: 3,387
Originally Posted by shavedmax
where have you been stranger?
I've been working buddy. I should be around your area one of these weekends to come to bother our friend. I will surely give you a call and boy don't we have a lot of snow
Old Jan 24, 2005 | 08:25 PM
  #12  
Maximan190's Avatar
Senior Member
iTrader: (8)
 
Joined: Oct 2001
Posts: 3,996
From: long island, NY
big brake kit?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
matts95max
General Maxima Discussion
15
Apr 23, 2025 10:44 AM
BkGreen97
Maximas for Sale / Wanted
2
Apr 2, 2016 05:47 AM
bbsitum
4th Generation Maxima (1995-1999)
4
Sep 11, 2015 04:55 PM
flu2000
7th Generation Maxima (2009-2015)
5
Sep 8, 2015 02:23 PM
beerman1378
7th Generation Maxima (2009-2015)
1
Sep 8, 2015 02:19 PM




All times are GMT -7. The time now is 04:39 PM.