custom headlight covers/ wade covers/ flush mounted.
#1
custom headlight covers/ wade covers/ flush mounted.
I know of a few that did flsuh covers for e36's
But has anyone done SEALED' covers?
I finally got some wade covers(Big thanx to Craig) and they cover the headlight AND corner. My corners are already have the lense removed for clear acrylic covers that I ghetto screwwWed in place.
Basically my mission is to make a corner and headlamp one unit, seal and pretty!
Any tips about working plastic and sealing would be nice.
But has anyone done SEALED' covers?
I finally got some wade covers(Big thanx to Craig) and they cover the headlight AND corner. My corners are already have the lense removed for clear acrylic covers that I ghetto screwwWed in place.
Basically my mission is to make a corner and headlamp one unit, seal and pretty!
Any tips about working plastic and sealing would be nice.
#2
Originally Posted by therealgoon9
I know of a few that did flsuh covers for e36's
But has anyone done SEALED' covers?
I finally got some wade covers(Big thanx to Craig) and they cover the headlight AND corner. My corners are already have the lense removed for clear acrylic covers that I ghetto screwwWed in place.
Basically my mission is to make a corner and headlamp one unit, seal and pretty!
Any tips about working plastic and sealing would be nice.
But has anyone done SEALED' covers?
I finally got some wade covers(Big thanx to Craig) and they cover the headlight AND corner. My corners are already have the lense removed for clear acrylic covers that I ghetto screwwWed in place.
Basically my mission is to make a corner and headlamp one unit, seal and pretty!
Any tips about working plastic and sealing would be nice.
Yes,
James92SE did it not long ago and has by far the best most factory looking install. He did it like Craig and I though and cut the corner cover off.
Brandon90GXE and Alex (spyhunter something or nother on here) did it like you are talking about. I think Brandon sealed his as well but I cant remember. To me they didnt look right as one piece but with a little work you can make them look great.
#9
Senior Member
iTrader: (1)
Join Date: Jan 2002
Location: Miami, FL. / Indianapolis, IN.
Posts: 2,610
Originally Posted by pest2001
i have the covers sitting in my garage Rick i was gonna give them to you because i dont remember what i did with the stock covers on the e36
#11
Senior Member
iTrader: (1)
Join Date: Jan 2002
Location: Miami, FL. / Indianapolis, IN.
Posts: 2,610
y don't u drive it that much anymore??? hopefully i might show up in my '93 after i do the motor swap or if not in the '89 after i install the y-pipe and get the papers for it. but we'll c what happens.
#12
I agree with awsm...
Trying to do the whole combined corner + headlight.... it just doesnt look right at all. Downright tacky IMO
therealgoon..
Something like this?
http://www.hostmeplz.com/is.php?i=75...re_5341sma.jpg
http://www.hostmeplz.com/is.php?i=75...icture_040.jpg
Sealed, waterproof, etc
Trying to do the whole combined corner + headlight.... it just doesnt look right at all. Downright tacky IMO
therealgoon..
Something like this?
http://www.hostmeplz.com/is.php?i=75...re_5341sma.jpg
http://www.hostmeplz.com/is.php?i=75...icture_040.jpg
Sealed, waterproof, etc
#13
Originally Posted by GRNMAXDMON
y don't u drive it that much anymore??? hopefully i might show up in my '93 after i do the motor swap or if not in the '89 after i install the y-pipe and get the papers for it. but we'll c what happens.
#14
Senior Member
iTrader: (1)
Join Date: Jan 2002
Location: Miami, FL. / Indianapolis, IN.
Posts: 2,610
Originally Posted by James92SE
I agree with awsm...
Trying to do the whole combined corner + headlight.... it just doesnt look right at all. Downright tacky IMO
therealgoon..
Something like this?
http://www.hostmeplz.com/is.php?i=75...re_5341sma.jpg
http://www.hostmeplz.com/is.php?i=75...icture_040.jpg
Sealed, waterproof, etc
Trying to do the whole combined corner + headlight.... it just doesnt look right at all. Downright tacky IMO
therealgoon..
Something like this?
http://www.hostmeplz.com/is.php?i=75...re_5341sma.jpg
http://www.hostmeplz.com/is.php?i=75...icture_040.jpg
Sealed, waterproof, etc
btw: James weren't u the one that swapped a VE from a junkyard into ur car awhile back??? cuz i remember seein' pics of it but don't remember if it was for ur car or someone else's.
#15
Originally Posted by GRNMAXDMON
oooohhh i want mine like that
btw: James weren't u the one that swapped a VE from a junkyard into ur car awhile back??? cuz i remember seein' pics of it but don't remember if it was for ur car or someone else's.
btw: James weren't u the one that swapped a VE from a junkyard into ur car awhile back??? cuz i remember seein' pics of it but don't remember if it was for ur car or someone else's.
#16
Senior Member
iTrader: (1)
Join Date: Jan 2002
Location: Miami, FL. / Indianapolis, IN.
Posts: 2,610
Originally Posted by James92SE
Yeah that was me... I got a junkyard VE but I didnt swap it into my car. It's sitting in my garage on the stand half torn down
r u buildin' it to produce more hp or to just have a spare one layin' around??? cuz im currently doin' this. but not sure to gain more hp or to just have it to spec with brand new parts before i swap it in.
#17
Originally Posted by James92SE
I agree with awsm...
Trying to do the whole combined corner + headlight.... it just doesnt look right at all. Downright tacky IMO
therealgoon..
Something like this?
http://www.hostmeplz.com/is.php?i=75...re_5341sma.jpg
http://www.hostmeplz.com/is.php?i=75...icture_040.jpg
Sealed, waterproof, etc
Trying to do the whole combined corner + headlight.... it just doesnt look right at all. Downright tacky IMO
therealgoon..
Something like this?
http://www.hostmeplz.com/is.php?i=75...re_5341sma.jpg
http://www.hostmeplz.com/is.php?i=75...icture_040.jpg
Sealed, waterproof, etc
and where do you guys get your Wade covers from??
#18
Yeah i just finished reading your article you posted. Look really tight man!
But, your max is dressed up a lil different than mine. What I'm thinking about doing is using the wade cover to make the corner and headlamp one. that means double the sealing. heh....
I want to change the corner though.
1.rewire the little 944 bulb into a real bright amber led, An led so no chance of melting the cover.
2. remove the 'turn' bulb and replace it with a projection lens and h3 bulb to ONLY light up when singoled to one direction or the other.
Paint the inside of the corner black. Because the housing of my headlight are black(thier the halo projectors.)
And possible lightly smoke the entire assembly.
But, your max is dressed up a lil different than mine. What I'm thinking about doing is using the wade cover to make the corner and headlamp one. that means double the sealing. heh....
I want to change the corner though.
1.rewire the little 944 bulb into a real bright amber led, An led so no chance of melting the cover.
2. remove the 'turn' bulb and replace it with a projection lens and h3 bulb to ONLY light up when singoled to one direction or the other.
Paint the inside of the corner black. Because the housing of my headlight are black(thier the halo projectors.)
And possible lightly smoke the entire assembly.
Originally Posted by James92SE
I agree with awsm...
Trying to do the whole combined corner + headlight.... it just doesnt look right at all. Downright tacky IMO
therealgoon..
Something like this?
http://www.hostmeplz.com/is.php?i=75...re_5341sma.jpg
http://www.hostmeplz.com/is.php?i=75...icture_040.jpg
Sealed, waterproof, etc
Trying to do the whole combined corner + headlight.... it just doesnt look right at all. Downright tacky IMO
therealgoon..
Something like this?
http://www.hostmeplz.com/is.php?i=75...re_5341sma.jpg
http://www.hostmeplz.com/is.php?i=75...icture_040.jpg
Sealed, waterproof, etc
#19
I did a little work on the corners. I replaced that daul filiment bulb with a pilot projector fog light! BWhahah. Reason being, I wanted a black housing like my projector headlights. But the problem with using the originol bulb was the light wouldn't reflect off the black and light up the outside. A fog will light it up and then some. It will only be on when I'm signoled to the side. If that wasn't clear. If i signol right, then only the right side projector in the corner will turn on. here's some pics.
#24
i thought those headlight covers only covered the headlights.....hence the name headlight covers....
correct me if im wrong. Im just waiting to do this this summer. well atleast the headlights all flush and junk.
correct me if im wrong. Im just waiting to do this this summer. well atleast the headlights all flush and junk.
#26
#27
http://performance.gearheadracingpar...adlight_covers
seen this site, it covers the three main brands of covers....
seen this site, it covers the three main brands of covers....
#28
Guest
Posts: n/a
Originally Posted by James92SE
I agree with awsm...
Trying to do the whole combined corner + headlight.... it just doesnt look right at all. Downright tacky IMO
therealgoon..
Something like this?
http://www.hostmeplz.com/is.php?i=75...re_5341sma.jpg
http://www.hostmeplz.com/is.php?i=75...icture_040.jpg
Sealed, waterproof, etc
Trying to do the whole combined corner + headlight.... it just doesnt look right at all. Downright tacky IMO
therealgoon..
Something like this?
http://www.hostmeplz.com/is.php?i=75...re_5341sma.jpg
http://www.hostmeplz.com/is.php?i=75...icture_040.jpg
Sealed, waterproof, etc
#29
Originally Posted by tripleGmax
i thought those headlight covers only covered the headlights.....hence the name headlight covers....
correct me if im wrong. Im just waiting to do this this summer. well atleast the headlights all flush and junk.
correct me if im wrong. Im just waiting to do this this summer. well atleast the headlights all flush and junk.
#30
I'm just too lazy to cut off the corner.
Originally Posted by «§»Craig B«§»
The way they come, they cover the headlight and corner. But most of us that have used them just cut off the corner part
#34
Originally Posted by Jeff92se
Thanks pest for posting. I've been meaning to see how a stillen lip looks with just body painted lowers. Niiiicceeeeee
you could've just asked jeffy...
with mudflaps too
16's comparison
carry on with the lights again
#36
Originally Posted by James92SE
well alrighty then
#39
Originally Posted by James92SE
I agree with awsm...
Trying to do the whole combined corner + headlight.... it just doesnt look right at all. Downright tacky IMO
therealgoon..
Something like this?
http://www.hostmeplz.com/is.php?i=75...re_5341sma.jpg
http://www.hostmeplz.com/is.php?i=75...icture_040.jpg
Sealed, waterproof, etc
Trying to do the whole combined corner + headlight.... it just doesnt look right at all. Downright tacky IMO
therealgoon..
Something like this?
http://www.hostmeplz.com/is.php?i=75...re_5341sma.jpg
http://www.hostmeplz.com/is.php?i=75...icture_040.jpg
Sealed, waterproof, etc
Ahhh! Sealed headlight covers?! How did you do it? With fiberglass?
therealgoon: those corners look really cool. Wish I had that grade of fabrication skill...