Any idea why I get low idle sometimes at stop light
Any idea why I get low idle sometimes at stop light
Hey,
I noticed recently that I have been gettin a lower idle while I apply brakes approaching a stop light or sign. It drops to about 400 500 rpms, u can kinda feel it in steering wheel. Also my brakes sometimes dont work the greatest, the pedal seems to drop when the A/C compressor engages at a stop light. It also seems like the brakes arnt workin to the fullest. Here is wats new on the car.
Stuff thats new...
Injectors (2 yrs ago)
WSP Y-Pipe (Last yr)
Tires (last month)
Brakes (last Yr, Rotors and Pads)
KYB GR-2 All round (2 yrs ago)
Distributor & Rotor ( last yr)
Spark Plugs (Last month)
Wires (last month)
Timming Belt & Tensioner (3 months ago)
UR Racing UDP ( 3 months ago)
All New Belts (3 months ago)
Ebay Remis Style ( last yr)
Battery ( 3 months ago)
Some more stuff too lol.
Thanks Guys
I noticed recently that I have been gettin a lower idle while I apply brakes approaching a stop light or sign. It drops to about 400 500 rpms, u can kinda feel it in steering wheel. Also my brakes sometimes dont work the greatest, the pedal seems to drop when the A/C compressor engages at a stop light. It also seems like the brakes arnt workin to the fullest. Here is wats new on the car.
Stuff thats new...
Injectors (2 yrs ago)
WSP Y-Pipe (Last yr)
Tires (last month)
Brakes (last Yr, Rotors and Pads)
KYB GR-2 All round (2 yrs ago)
Distributor & Rotor ( last yr)
Spark Plugs (Last month)
Wires (last month)
Timming Belt & Tensioner (3 months ago)
UR Racing UDP ( 3 months ago)
All New Belts (3 months ago)
Ebay Remis Style ( last yr)
Battery ( 3 months ago)
Some more stuff too lol.
Thanks Guys
Originally Posted by nForce
Humm I waz thinking about this. Where do I get the throttle body gasket thought? I tryed to find it no one locally had this, not even Nissan Dealer. How do I clean the IAC?
Thanks
Thanks
Take it off and look inside it and you will probably see a lot of black gunky crap in there....A small brush will come in handy when cleaning it out.....
Also take a good look at all your vacuum hoses,make sure they are all in their place and not cracked....broken vacuum lines will cause a bad idle condition...
Originally Posted by nForce
... How do I clean the IAC?...
Use liquid sealant.
Open the whole thing, and wash with some alcohol based liquid, rag. The stepper motor screw in the valve should turn freely: some very light grease might help. Sticking grease will ruin the freedom...
clic on: http://www.cardomain.com/ride/748507/4
Thread
Thread Starter
Forum
Replies
Last Post
doobadoo
4th Generation Maxima (1995-1999)
2
Aug 15, 2015 06:43 PM
kirkhilles
5th Generation Maxima (2000-2003)
2
Aug 8, 2015 10:53 AM
yat70458
5th Generation Maxima (2000-2003)
2
Aug 3, 2015 01:16 PM




