Intake Question
#10
wow. please check the stickies before shoting q's. you'll find you can answer most of them without needing to ask. the 300zx has a vg block, so it's not a dohc. the 300zx also did not have a transverse mount engine, so the intake is designed and located an entirely different way than a 93 se maxima.
#11
Originally Posted by mattcomet82
wow. please check the stickies before shoting q's. you'll find you can answer most of them without needing to ask. the 300zx has a vg block, so it's not a dohc. the 300zx also did not have a transverse mount engine, so the intake is designed and located an entirely different way than a 93 se maxima.
![+1](https://maxima.org/forums/images/smilies/+1.gif)
![ButtKick](https://maxima.org/forums/images/smilies/buttkick.gif)
#12
I had the problem with the adapter thing too, after striking out with all my local shops I was real hesitant to spend money on an ebay one that I'd have a hard time returning.
Also trying to just get that first pipe from the CAI to get rid of the accordian piping seems impossible. I don't see why you can't use a 4th gen one and plug that little hose stub, but again, I hate to waste money.
Also trying to just get that first pipe from the CAI to get rid of the accordian piping seems impossible. I don't see why you can't use a 4th gen one and plug that little hose stub, but again, I hate to waste money.
#18
Originally Posted by maximapitko
wiking, what are the impressions after driLling your air box? Noise,performance?
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
The tube before box is worst choke. Then second is the 70mm stock pipe end crimp, see pic. Also TB seals were originally misplaced... plenum 'direct from mold', grinded worst of them off and grinded the mid wall edge. I calculated that intake the area was boosted 20%, 200% at the box. That has a big effect. After mods 0-60 was reduced to near 8s from the stock 9s. Thats not all mods, theres smtg else towards the valves. Now the box is 'semi CAI'; low rpm gets most (?) air from the stock pipe. I would if I could add rubber 'valves' on the holes, opening when air sucks (only full throttle) and could reduce noise, but why? Maybe for cold air sake...
IMpressions: Now 0-60 is definitely below 8s, near somewhere 7.5s... hand clocked time. Time is good enough in our volvo -state
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
Another impression: drillin is dirt cheap.
clic http://www.cardomain.com/ride/748507/2
![](http://memimage.cardomain.net/member_images/4/web/748000-748999/748507_7.jpg)
#19
Originally Posted by kcidmil
Just modify the flange inside your airbox. Have that trimmed down, and get shorter bolts.
#22
Yes, we all know that simple mod can take 0.5 sec off everyone's 0-60 time. That hp increase must be in the order of 30hp in order to do that.
![laugh](https://maxima.org/forums/images/smilies/laugh.gif)
![bowrofl](https://maxima.org/forums/images/smilies/bowrofl.gif)
Originally Posted by maximapitko
that's a crazy improvement though in the acceleration time. I'll be next to try it exactly like that.
#27
Originally Posted by Jeff92se
I congratulated him for making his factory cai into a hai. Hai!
#29
![Confused](https://maxima.org/forums/images/smilies/confused.gif)
![bowrofl](https://maxima.org/forums/images/smilies/bowrofl.gif)
Originally Posted by Wiking
Yes Thank you sir. We need all glob_all warmup air here we can get... Maybe this is laziness toward CAI illusion. What my horses want when I whip 'em, is extra gasp on the road, and all they suck is Cold.
#34
I'm easy like Sunday morning over here. Let me know when it's done. 90% of the people that want pics, just copy the thing
Which is fine
![idea](https://maxima.org/forums/images/smilies/idea.gif)
Originally Posted by maximapitko
take it easy buddy...I wanted to see the pic,that's all...
#36
Originally Posted by maximapitko
that's a crazy improvement though in the acceleration time. I'll be next to try it exactly like that.
Now after A/T oil change, launch is problematic (to get under 8s.) : time passes by sittin on the ol spinnin cartwheels... Oh boy, this becomes addictive. Anyways, no use buying better tires because soon snow covers all the fun
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
![Smilie](https://maxima.org/forums/images/smilies/smile.gif)
#38
Originally Posted by James92SE
Did everybody stop making CAI kits? WSP?? Place Racing??
wsp still makes hai kits for vg motors, 50% sure about cai for a vg though. if you can get ahold of place racing, let everybody else know. you'll be the first in forever.
#40
Originally Posted by bmxr152
y dont you buy a $20 one off ebay like i did? IT works, fits, and sounds great!