Ok, so i'm changing my interior. The seat i'm installing actually had a slightly bent rail, so i took the entire bottom backets, motor and all swapped them them from old to new. The problem is that there is now no power in my power seats. I know for sure that they work, i had to use it to move the seats forwards and backwards so i could take the screws out to remove the seats. Anyone have a clue as to what the problem might be?

 

have you checked all the fuses and connections?

 

yeah they're fine

 

when I had that problem, it ended up being the actuator switch on the side of the seat. Try swapping that out.

 

what a royal pain in the ***, looks like on the driver side it was the cable that plugs into the seatbet as well as the actuator switch, got that taken care of, the passenger side doesn't work, going to try the actuator switch before swapping the whole damn assembly again, hopefully that works