how hard is it to replace rear window
#1
how hard is it to replace rear window
well someone f***in smashed my left back door window i wanted to know how hard is it to relpace it and does it just slide in or is there only one way to put it in??thanks i will post pics later today..
#2
1. Pull off door panel 2. unbolt window from regulator 3. Slide out broken window 4. Slide in new window (make sure it tracks correctly) 5.bolt into assembly put everything away. for your first time doing it is should prob take an hour tops.
#3
which window?
the bigger one: see above ^
the little one: see above plus you'll need to unscrew the bottom of the metal piece that seperates the big and small window and tale iy out
the bigger one: see above ^
the little one: see above plus you'll need to unscrew the bottom of the metal piece that seperates the big and small window and tale iy out
#5
Put the rear window in the down position.
There are 4 screws holding on the door panel. Take out the ash tray, the plastic plug on the top of the door pull and the plastic insert under the door handle to access them.
After removing those screws, pop off the door panel. Disconnect the two wiring harnesses. With the rear window down you will see the tow bolts connecting the rear window to the regulator. Take those out and let the rear window rest inside the door.
You will now need to loosen the black pillar between the rear window and vent window. You will notice two bolts holding the pillar in place. Remove those bolts. There is also a screw at the top of the pillar, underneath the rubber. Do not take the rubber out, just use a small flat screwdriver to hold it back while you loosen the screw with a phillips head.
At this point the pillar should be loose, pull it down and push it foreward in order to loosen it. I needed to also take the rear window out in order to reinstall the vent "break-in" window.
The vent window rubber will just fall out, and the new vent window will simply slide in and then be held tight by reinstalling the black pillar.
*Probably $20-$40 for vent window from boneyard.
*Make sure to get the rear window back on both tracks when reinstalling.
*Don't tighten regulator bolts too tight.
There are 4 screws holding on the door panel. Take out the ash tray, the plastic plug on the top of the door pull and the plastic insert under the door handle to access them.
After removing those screws, pop off the door panel. Disconnect the two wiring harnesses. With the rear window down you will see the tow bolts connecting the rear window to the regulator. Take those out and let the rear window rest inside the door.
You will now need to loosen the black pillar between the rear window and vent window. You will notice two bolts holding the pillar in place. Remove those bolts. There is also a screw at the top of the pillar, underneath the rubber. Do not take the rubber out, just use a small flat screwdriver to hold it back while you loosen the screw with a phillips head.
At this point the pillar should be loose, pull it down and push it foreward in order to loosen it. I needed to also take the rear window out in order to reinstall the vent "break-in" window.
The vent window rubber will just fall out, and the new vent window will simply slide in and then be held tight by reinstalling the black pillar.
*Probably $20-$40 for vent window from boneyard.
*Make sure to get the rear window back on both tracks when reinstalling.
*Don't tighten regulator bolts too tight.
#9
Originally Posted by internetautomar
looks like driver side.
just follow the curve of the glass
just follow the curve of the glass
Maybe I'm seeing things but with the curve sloping to the left and window bowing out that looks like a passenger rear....but maybe I'm missing something.
#10
Originally Posted by Josh
Maybe I'm seeing things but with the curve sloping to the left and window bowing out that looks like a passenger rear....but maybe I'm missing something.
oh well, I may be wrong
Thread
Thread Starter
Forum
Replies
Last Post
vingodine
5th Generation Classifieds (2000-2003)
45
05-21-2016 12:46 PM
Huttig2009
5th Generation Classifieds (2000-2003)
8
09-25-2015 03:31 PM