anyone uses the NGK G-Power?
#2
Usually they are "Gapped To Run." But sometimes they aren't, I ran into that problem the other day at work (Auto Zone), the gap was off by like .05 thousandths.
Here's my question though, is NGK better than Denso or vise versa? I'm thinking of "snagging" a set of Denso's tonight when I go in and trying them out. $13 a plug is just ridiculous!
Here's my question though, is NGK better than Denso or vise versa? I'm thinking of "snagging" a set of Denso's tonight when I go in and trying them out. $13 a plug is just ridiculous!
#3
Originally Posted by klown_phreak
Usually they are "Gapped To Run." But sometimes they aren't, I ran into that problem the other day at work (Auto Zone), the gap was off by like .05 thousandths.
Here's my question though, is NGK better than Denso or vise versa? I'm thinking of "snagging" a set of Denso's tonight when I go in and trying them out. $13 a plug is just ridiculous!
Here's my question though, is NGK better than Denso or vise versa? I'm thinking of "snagging" a set of Denso's tonight when I go in and trying them out. $13 a plug is just ridiculous!
NGK is what you need to use...
http://forums.maxima.org/showthread.php?t=417117
#4
Yeah, I have them in my VG engine. They've worked well for me and I like them. Check the gap before putting in, because it's NOT 0.044" for your engine, the range the owner's manual gives is 0.039" - 0.043", so I always do 0.041". You'll find that these plugs will meet the above-range.
#5
Originally Posted by MyGreenMax94
#6
I put a set of some crappy Champions in my car in March of 05. that June i visited a friend out of town and when i was leaving going up the hill i noticed all of a sudden i had no power, than my car died, it started right back up and about 20 feet later same thing lose power than died. So i turned around and went back to my buddies we pulled the plugs and the electrodes that come from the porceleyne were melted even. I put a set of the NGK V-POWER and yesterday i changed the plugs and they were still in good shape, honestly i really didn't need to change them but better safe than sorry. I had them on for 10 months and they looked that good. I'll stick to NGK. This time i put a set of NGK G-POWER I'm sure i won't be disappointed
Thread
Thread Starter
Forum
Replies
Last Post
evonder73
4th Generation Maxima (1995-1999)
6
09-01-2015 02:21 PM