Fuel injector wiring
#1
Fuel injector wiring
Well I recently replace one of the plug wires that got rusty somehow. And I notices that if I touch the fuel injectors or the wires the sound of the idle changes, I figure I am shorting it out a little or something. I took a pic of the wires in the dark tonight when I got home from work and I will make a video of the problem tomorrow if you want.
ok, all the pics i took in the dark suck except one and it just shows the rubber broken around the wires.
the wires are still coated in there own plastic covering
ok, all the pics i took in the dark suck except one and it just shows the rubber broken around the wires.
the wires are still coated in there own plastic covering
![](http://img.photobucket.com/albums/v53/pinkfloyd33/DSCN0158.jpg)
#4
That picture appears too big more most cell phones.
Anyways, I'd say the terminals are probably dirty if anything. There's always a chance that the wire could be slightly pulled off of the connector since the boot is somewhat broken but if the injector wasn't firing you'd definitely notice it. You may just try cleaning them with some electric contact cleaner then use some dielectric grease to be absolutely sure.
Anyways, I'd say the terminals are probably dirty if anything. There's always a chance that the wire could be slightly pulled off of the connector since the boot is somewhat broken but if the injector wasn't firing you'd definitely notice it. You may just try cleaning them with some electric contact cleaner then use some dielectric grease to be absolutely sure.
Thread
Thread Starter
Forum
Replies
Last Post
jmlee44
4th Generation Maxima (1995-1999)
8
10-02-2022 02:13 PM
My Coffee
New Member Introductions
15
06-06-2017 02:01 PM
Forge277
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
12
06-13-2016 09:26 PM