help about clock

Reply Subscribe

Thread Tools

Search this Thread

May 8, 2008 | 08:08 AM

stevex

Thread Starter

Junior Member

Joined: Oct 2006

Posts: 54

From: Brcko distrikt BiH, Bosna & Hercegovina

help about clock

I need some link with wire arrangement for clock. thanks

May 8, 2008 | 08:42 AM

Matt93SE

STFU n00b!

iTrader: (44)

Joined: Aug 2000

Posts: 18,087

From: Houston

There's diagrams in the service manual.

it's easy enough to figure out though..

what's it doing, or not doing?

May 8, 2008 | 09:17 AM

stevex

Thread Starter

Junior Member

Joined: Oct 2006

Posts: 54

From: Brcko distrikt BiH, Bosna & Hercegovina

doing, not doing, doing... and I fix it like you said, and clock work some period good, but problems again.
I purchase a new and I want to connect it. but the connector is diferent

May 8, 2008 | 11:18 AM

Matt93SE

STFU n00b!

iTrader: (44)

Joined: Aug 2000

Posts: 18,087

From: Houston

different connector?

Is the clock from a different car?
I've fixed dozens of them and only a couple have had problems later. another solder job and they're going fine again. :shrug:

May 8, 2008 | 01:18 PM

stevex

Thread Starter

Junior Member

Joined: Oct 2006

Posts: 54

From: Brcko distrikt BiH, Bosna & Hercegovina

yes, from different car, and I need to know what is each wire on maxima's clock?

May 8, 2008 | 01:45 PM

BenStoked

Jesus was a Zombie.

iTrader: (7)

Joined: Aug 2007

Posts: 3,962

From: OKC, OK

1. -----
2. b/r ill control
3. w/l power-key
4. r/y ill control
5. B gnd
6. br/w power-mem
perhaps i have the pins backwards, so included the wire key as well (nothing on pin 1)

May 8, 2008 | 02:20 PM

stevex

Thread Starter

Junior Member

Joined: Oct 2006

Posts: 54

From: Brcko distrikt BiH, Bosna & Hercegovina

thanks

May 8, 2008 | 07:40 PM

Matt93SE

STFU n00b!

iTrader: (44)

Joined: Aug 2000

Posts: 18,087

From: Houston

You can also pull the circuit board out of the assembly and the functions are silkscreened on the boards.

May 8, 2008 | 08:14 PM

BenStoked

Jesus was a Zombie.

iTrader: (7)

Joined: Aug 2007

Posts: 3,962

From: OKC, OK

Quote:

Originally Posted by Matt93SE

You can also pull the circuit board out of the assembly and the functions are silkscreened on the boards.

lolz. last time i fixed the clock, I tested it with a power supply. I didn't think I had looked at the fsm for wiring, so i was trying to figure out how i wired it up. that was how.