3rd Generation Maxima (1989-1994) Learn more about the 3rd Generation Maxima here.

Power lock will not go up

Thread Tools
 
Search this Thread
 
Old 11-24-2001, 08:20 PM
  #1  
JoeWillie
Guest
 
Posts: n/a
Power lock will not go up

The power lock on the front passenger door will not go up when the switch is hit. It will go down. All the other door lock work fine. I thnik it is the actuator. I'm not sure. I looks like it hard to get at. I welcome all input.

JoeWillie
 
Old 03-15-2002, 12:37 PM
  #2  
Senior Member
 
wyskibumm's Avatar
 
Join Date: Jan 2002
Location: Centennial, CO
Posts: 144
I had the same problem wiht my front passenger door lock. The lock wouldn't pop up with the rest of the locks, so i went on ebay and for 7 bucks got a 2 wire actuator. I mounted it to my door then plugged its green wire to my existing brown/white striped wire. And i hooked up my solid brown wire to its blue wire. It works great now! Note: the brown wires i was talking about are wrapped up in black tape with two other wires (4total) and then plugged into the existing actuator, so you have to expose them and cut them off of the connector, but then replug the other 2 wires back into the broken actuator (dont ask me why though). If you have any questions e-mail me jlunde944@hotmail.com

good luck
wyskibumm is offline  
Old 03-17-2002, 10:17 PM
  #3  
JoeWillie
Guest
 
Posts: n/a
Thanks for the response. When I first looked into the problem I could not see the actuator. I had the door panel off. So i kind of put it on hold.

Where exactly is the actuator location in the door(passenger side)? I can pick up the part at the dealer.

Thanks a lot,

JoeWillie
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gigabyte
8th Generation Maxima (2016-)
8
01-06-2017 06:05 PM
leatherneck
4th Generation Maxima (1995-1999)
1
09-30-2015 09:16 PM
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
09-29-2015 02:02 PM



Quick Reply: Power lock will not go up



All times are GMT -7. The time now is 05:26 AM.