Audi LED headlight mod....
#41
#44
Senior Member
Thread Starter
iTrader: (2)
Join Date: Aug 2009
Location: Northwest Arkansas
Posts: 223
Didn't have much time today to work on it, got the first light in and couldn't resist taking a pic at night testing the LEDs. They are bright enough I had trouble getting a good picture without the flash so here are two to give an example of how there will be plenty of visibility. By going inside the headlight housing it is going to kick a$$. Will be getting up early tomorrow to try to finish the install and get the clear sides on.
Without flash
With flash
Off to bed, hope to have finished product pics in the morning and will try to do a how-to for the install and clear corners when I am done.
Without flash
With flash
Off to bed, hope to have finished product pics in the morning and will try to do a how-to for the install and clear corners when I am done.
#48
Senior Member
Thread Starter
iTrader: (2)
Join Date: Aug 2009
Location: Northwest Arkansas
Posts: 223
Got it done and tested (headlights) and everything works great. Going to go back out and mess with the LEDs and see how I want to hook them up. Been taking a bunch of pictures, will be on in a bit with an update and pics.
#49
Senior Member
Thread Starter
iTrader: (2)
Join Date: Aug 2009
Location: Northwest Arkansas
Posts: 223
All done!!
Here are two pictures taken earlier in the day with the lights and no LEDs. Also took the time to put the clear corners on that have been sitting in my bedroom. Was saving them for the Stillen kit and new paint but couldn't help it.
I wired a rocker switch off of my cig lighter for the LEDs so I can have them on whenever I wish. Can I tap into my blinkers as well so that they blink when on or off with my blinkers? Wasn't sure how to do it or if it was possible.
Front - Headlights only
Side - Headlights/LEDs
Will take some night shots shortly as well.
Here are two pictures taken earlier in the day with the lights and no LEDs. Also took the time to put the clear corners on that have been sitting in my bedroom. Was saving them for the Stillen kit and new paint but couldn't help it.
I wired a rocker switch off of my cig lighter for the LEDs so I can have them on whenever I wish. Can I tap into my blinkers as well so that they blink when on or off with my blinkers? Wasn't sure how to do it or if it was possible.
Front - Headlights only
Side - Headlights/LEDs
Will take some night shots shortly as well.
#52
Senior Member
Thread Starter
iTrader: (2)
Join Date: Aug 2009
Location: Northwest Arkansas
Posts: 223
Thanks, also took the time to ditch the mudflaps and the front license plate holder - looking much nicer I think. Could not believe the difference on the test drive.
Can't wait to get the bodywork done.
Can't wait to get the bodywork done.
Thread
Thread Starter
Forum
Replies
Last Post
doctorpullit
8th Generation Maxima (2016-)
21
10-28-2019 10:58 PM
trsandrew
7th Generation Maxima (2009-2015)
17
04-08-2016 06:45 PM
trsandrew
Group Deals / Sponsors Forum
2
10-25-2015 02:47 PM