3rd Generation Maxima (1989-1994) Learn more about the 3rd Generation Maxima here.

Manual photos don't match my max

Old May 18, 2002 | 01:25 PM
  #1  
gramma's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: May 2002
Posts: 14
Manual photos don't match my max

A couple of months ago I bought a used '94 Maxima and for the life of me I can't find a manual, Chilton or Haynes, that has an under-hood photo that looks like mine. I do simple maintenance myself, but can't find the PCV valve because of ignorance and manuals that don't look like they are for the same car. Is anyone willing to help a grandma with such a simple question as where's the PCV? I also wouldn't mind knowing where I can get a manual that actually looks like my car. I'm afraid if I order an owner's manual it will be wrong,too. Hep me, hep me.

Old May 18, 2002 | 01:28 PM
  #2  
jaredb03's Avatar
Member
 
Joined: Feb 2002
Posts: 99
Re: Manual photos don't match my max

Do you have an SE or GXE? and is there a problem with the car?
Old May 18, 2002 | 01:50 PM
  #3  
gramma's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: May 2002
Posts: 14
Re: Re: Manual photos don't match my max

Originally posted by jaredb03
Do you have an SE or GXE? and is there a problem with the car?
Well, I have looked all over the body of that car and haven't found SE or GXE on it anywhere so I don't know. There is no particular problem except it idles rough and tends to stall if I come to a complete stop after warming up for only about 2 to 4 blocks. I've only owned it a couple of months and mostly it runs fine. It has >110,000 on it and I'm just trying to get all my maintenance schedules off to a known start.

Doesn't SE and GXE refer to body trim? I'm only concerned with the under the hood side of things just now, tho getting some new paint on the rear bumper would be nice. But that's later. For now, can you help with locating the PCV?
Old May 18, 2002 | 01:57 PM
  #4  
Dummy's Avatar
Senior Member
 
Joined: Jan 2002
Posts: 699
SE = white face guages
GXE = black face guages

in a 94 they put different motors in the SE's than in the GXE's you need to determine if it a se or gxe before you proceed.
Old May 18, 2002 | 02:15 PM
  #5  
DA-MAX's Avatar
Eat, sleep, and sh*t 2JZ
iTrader: (10)
 
Joined: Nov 2000
Posts: 13,978
Does your engine look like this????

if you have a 94 GXE (VG engine), the PCV valve is in the red circle....



loosen the clamp, detach the hose, check for cracks, unscrew the valve, and then reverse order replacement!
Old May 18, 2002 | 02:17 PM
  #6  
gramma's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: May 2002
Posts: 14
Originally posted by Dummy
SE = white face guages
GXE = black face guages

in a 94 they put different motors in the SE's than in the GXE's you need to determine if it a se or gxe before you proceed.
Well, dang. My daughter's gone in the car and I can't recall for sure, but I think the gauges have white faces. This I can tell you for sure, the air intake is routed to the front of the engine compartment instead of to the rear like it is in the manual's photos. When I went to the parts store I was asked if I had single or dual overhead cams. I didn't know so we went out and looked and he picked out the parts but I never got real clear on the cams.

So, if I have an SE, does that match the engine configuration?
Old May 18, 2002 | 02:23 PM
  #7  
gramma's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: May 2002
Posts: 14
Re: Does your engine look like this????

Originally posted by DA-MAX
if you have a 94 GXE (VG engine), the PCV valve is in the red circle....



loosen the clamp, detach the hose, check for cracks, unscrew the valve, and then reverse order replacement!
Aw RITE! That's the way my engine looks, except for the blue plug wires and distributor 'box'. That's what I needed to know. I expected it to be on the front side. Just goes to show ya.

Thank you, thank you, thank you. Now when my daughter brings it back from seeing Bring In The Clones I'll know what to do.

I suspect I'll be back another day.
Old May 18, 2002 | 04:01 PM
  #8  
Sudesh's Avatar
Senior Member
 
Joined: Oct 2001
Posts: 832
Re: Re: Does your engine look like this????

Originally posted by gramma

I suspect I'll be back another day.
we're not here for one question stands! What are we? Maxima ******?

you better come back, we won't be used and then just dismissed.
Old May 19, 2002 | 06:21 AM
  #9  
gramma's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: May 2002
Posts: 14
Re: Re: Re: Does your engine look like this????

Originally posted by Sudesh


we're not here for one question stands! What are we? Maxima ******?

you better come back, we won't be used and then just dismissed.
Well,I can't very well say "I'll call you tomorrow", now can I? Hey, I had a great time! I'll be back the next time I'm, uh,... stumped. Ya done good, guys!

mmMWAa
Old May 19, 2002 | 10:28 AM
  #10  
FrankBattle's Avatar
Member
 
Joined: Jan 2002
Posts: 164
From: Corning, NY
I hope gramma is a she with that kiss.
Old May 19, 2002 | 11:31 AM
  #11  
gramma's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: May 2002
Posts: 14
kissin' grammas

Originally posted by FrankBattle
I hope gramma is a she with that kiss.
Been a while since I've seen a he gramma, dude. But, considering modern society and medicine, it's only a matter of time, I guess.

It's nice to get a big ole' grin along with the info I needed. Daughter's home and so is my car, andI've finished my Robin Cook book, so I guess I'll get to trying out the instructions. I'll let you know if I need more guidance. Thx, all.
Old May 19, 2002 | 03:29 PM
  #12  
pearl93max's Avatar
Senior Member
 
Joined: Feb 2002
Posts: 569
ha...is this for real????
Old May 19, 2002 | 07:06 PM
  #13  
PATRICK94SE's Avatar
Senior Member
 
Joined: Dec 2001
Posts: 886
Yes, and a very nice/well informed woman.
Old May 19, 2002 | 07:22 PM
  #14  
FrankBattle's Avatar
Member
 
Joined: Jan 2002
Posts: 164
From: Corning, NY
Originally posted by PATRICK94SE
Yes, and a very nice/well informed woman.
As opposed to...

I know you meant well, but you say that like it's that rare.

You go gramma!
Old May 19, 2002 | 07:29 PM
  #15  
PATRICK94SE's Avatar
Senior Member
 
Joined: Dec 2001
Posts: 886
No he asked if it was for real(I guess he assumed it was a joke) . I was telling him that yes it was......for ral
Old May 19, 2002 | 08:44 PM
  #16  
pearl93max's Avatar
Senior Member
 
Joined: Feb 2002
Posts: 569
oh...not meaning to be rude...that's awsome if a woman...even older woman can get out there and work on her own car.......no offinse was intended!!!
Old May 20, 2002 | 01:45 AM
  #17  
mykizism's Avatar
Senior Member
 
Joined: Dec 2000
Posts: 1,030
Originally posted by pearl93max
oh...not meaning to be rude...that's awsome if a woman...even older woman can get out there and work on her own car.......no offinse was intended!!!
not only that, but acutally using the internet and the org

a lot of people in their 40's dont even use the internet that much esp for car maintence they usually have the money to take it to a shop
Old May 20, 2002 | 08:26 PM
  #18  
gramma's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: May 2002
Posts: 14
Originally posted by mykizism


not only that, but acutally using the internet and the org

a lot of people in their 40's dont even use the internet that much esp for car maintence they usually have the money to take it to a shop
You guys are making me giggle. FYI, this gramma is 52, grandmother of 5, daughter of a master mechanic, sister to a couple of pretty talented mechanically inclined brothers, and ex-wife of one very helpless man. When our VW clutch cable broke, it was I who got the book and crawled under the car. When a different car died on our way to work, it was I who got out with an emery board and shinied up the points in the distributor cap. When I got single I definitely didn't have the money to pay someone else to do stuff like plugs and wires and such. Being able to read a computer manual as well, and having worked on computers since 1967 back in the days of DOS, (as in pre-PCs, let alone pre-Windows) I manage to take care of the things I must. I'd rather cook and garden and dance, but the car has to be done. Did any of you see My Cousin Vinny? Last of all, I ain't no butch. Or ***** for that matter.

I've been bragging on this group to everyone I know yesterday and today. And thanks, guys, for your nice compliments. Obviously insightful men.

Pam
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dank4us
7th Generation Maxima (2009-2015)
34
Jun 10, 2024 03:45 AM
Roymg
6th Generation Maxima (2004-2008)
11
Sep 3, 2018 05:10 AM
maxocar
5th Generation Maxima (2000-2003)
4
Aug 21, 2015 12:57 AM
MaximaDrvr
7th Generation Maxima (2009-2015)
16
Aug 19, 2015 08:20 PM
YourLocalAsian
6th Generation Maxima (2004-2008)
3
Aug 17, 2015 02:33 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 07:39 AM.