F/S: HID retrofit projectors
#1
F/S: HID retrofit projectors
My trusty Maxima, which served me well for many years, was recently totaled when a friend of mine backed into it while it was parked. I was sad to see it go... I was still getting compliments on it up until the accident. And it sucks having a car payment. Anyway...
For sale: retrofit HID lights. These were damaged in the accident. One light is perfectly fine, one was crushed. These are normal 4th Gen (1998) housings with retrofit Audi A6 projectors and bulbs. Because these are projectors these have a nice cut-off with no glare. The crushed projector might be salvageable, but it might not be. The bulb that was in the crushed projector probably doesn't work, either. The other side and bulb worked fine when after the accident. Note that both these are bi-xenon HIDs (both high and low beams are HID). Installation requires the cutting of one of the stock headlight jacks, so once you start installation, there's no going back... unless you want to soldier the cut wires back. Like I said, one side was still working, but I make no guarantees, as this is pretty much a homemade harness. I can help some with installation, but I am by no means an expert. Trust me when I say this, IT IS A PROJECT. And there's a chance it may not work. Fair warning. Other than what was described, it has everything you need... ballasts, wiring, etc. $75 shipped OBO.
Also note, that if you do want to pick up this project, A6 projectors can be found on eBay for a reasonable price.
You can see more pictures for all items at:
http://picasaweb.google.com/kreg989/MaximaPartsForSale
I accept PayPal, checks, or cash. If you want to pick them up, I am in Kansas City, MO. PM me with offers. Thank you.
Craig
For sale: retrofit HID lights. These were damaged in the accident. One light is perfectly fine, one was crushed. These are normal 4th Gen (1998) housings with retrofit Audi A6 projectors and bulbs. Because these are projectors these have a nice cut-off with no glare. The crushed projector might be salvageable, but it might not be. The bulb that was in the crushed projector probably doesn't work, either. The other side and bulb worked fine when after the accident. Note that both these are bi-xenon HIDs (both high and low beams are HID). Installation requires the cutting of one of the stock headlight jacks, so once you start installation, there's no going back... unless you want to soldier the cut wires back. Like I said, one side was still working, but I make no guarantees, as this is pretty much a homemade harness. I can help some with installation, but I am by no means an expert. Trust me when I say this, IT IS A PROJECT. And there's a chance it may not work. Fair warning. Other than what was described, it has everything you need... ballasts, wiring, etc. $75 shipped OBO.
Also note, that if you do want to pick up this project, A6 projectors can be found on eBay for a reasonable price.
You can see more pictures for all items at:
http://picasaweb.google.com/kreg989/MaximaPartsForSale
I accept PayPal, checks, or cash. If you want to pick them up, I am in Kansas City, MO. PM me with offers. Thank you.
Craig
Thread
Thread Starter
Forum
Replies
Last Post
The Frye
7th Generation Maxima (2009-2015)
6
09-02-2021 11:03 AM
MaxLife17
8th Generation Maxima (2016-)
43
06-27-2019 01:37 PM
03VQMAX
5th Generation Classifieds (2000-2003)
5
11-10-2015 03:39 PM