4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

help me construct my exhaust system

Thread Tools
 
Search this Thread
 
Old 08-08-2002, 06:10 PM
  #1  
Member
Thread Starter
 
rccardude909's Avatar
 
Join Date: Jul 2002
Posts: 95
help me construct my exhaust system

I have a 99 maxima. I'm trying to find a nice sounding exhaust system that won't go past 95 db and will not have a constant drone. I plan to buy either the frankencar intake, JWT or the stillen. I was looking at the warpspeed b-pipe but it will not fit onto an aftermarket muffler. I was looking at the powertech, magnaflow, and the obx mufflers but i'm not sure which will sound nicer. I was first leaning towards the powertech but then someone complained that it was too loud on a post that i searched for. Same goes for the OBX. Price is the key. Please help me construct the perfect combo for sound and performance. Recommend any intake,b-pipe, muffler combo. I cannot get the y-pipe because I live in cali and smog restrictions are strict.
rccardude909 is offline  
Old 08-26-2002, 11:32 AM
  #2  
Senior Member
 
orgasmicNYC's Avatar
 
Join Date: Feb 2002
Posts: 765
Re: help me construct my exhaust system

Bump, I got a Budget Y-Pipe and looking for a b-pipe now and muffler. I was thinking of getting a warpseed B-pipe but not sure should I get the one with the resonator? They say it fits the stock muffler so that means pretty much every muffler for the maxima thats a bolt on? Thanks.
orgasmicNYC is offline  
Old 08-26-2002, 11:53 AM
  #3  
Senior Member
iTrader: (2)
 
hokiemax's Avatar
 
Join Date: Sep 2000
Posts: 1,154
Unless you get a muffler that is a direct bolt on, (i.e, Stillen, HKS), the muffler needs to be welded on to the bpipe anyways. When you get a warpspeed bpipe, it will fit any muffler you are looking to get.
hokiemax is offline  
Old 08-26-2002, 12:59 PM
  #4  
Donating Maxima.org Member
iTrader: (1)
 
AltiMAX's Avatar
 
Join Date: May 2001
Posts: 363
Originally posted by hokiemax
Unless you get a muffler that is a direct bolt on, (i.e, Stillen, HKS), the muffler needs to be welded on to the bpipe anyways. When you get a warpspeed bpipe, it will fit any muffler you are looking to get.
. . . with a 2.25 inch inlet
AltiMAX is offline  
Old 08-26-2002, 01:47 PM
  #5  
Senior Member
 
heems27's Avatar
 
Join Date: Feb 2002
Location: Lexington, KY
Posts: 513
I've got a stillen intake,WSP y-pipe, and a Apexi WS catback and I love the way it sounds! It's pretty quiet at cruise with a nice, deep growl that reminds me of a throaty V8. The performance gains are pretty nice and it doesn't sound like a riced out Honda!!
heems27 is offline  
Old 08-26-2002, 02:18 PM
  #6  
Senior Member
 
AdMax98's Avatar
 
Join Date: Jul 2001
Posts: 741
Originally posted by AltiMAX


. . . with a 2.25 inch inlet
Or 2.5" as long as they do a proper weld.
AdMax98 is offline  
Old 08-26-2002, 03:09 PM
  #7  
Senior Member
iTrader: (2)
 
Charcoal95GXE's Avatar
 
Join Date: Jul 2002
Posts: 468
YO

I personally think the b pipe and a magnaflow muffler would sound pretty nice together
-Brian
Charcoal95GXE is offline  
Old 08-26-2002, 03:15 PM
  #8  
Senior Member
 
wikidbwoy's Avatar
 
Join Date: Feb 2001
Posts: 154
i use to have a magna flow it was deep and not to loud. now i have brullen and had the muffler shop run 2.5" piping from the cat. I would recomend brullen, they are a bit pricey though wholesale was like $250 or $300 about 2 years ago not sure now though.
wikidbwoy is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Justin Kroll
5th Generation Maxima (2000-2003)
3
10-01-2015 07:03 PM
09maxshawn11
5th Generation Maxima (2000-2003)
5
09-30-2015 10:28 AM
MichMaxFan
General Maxima Discussion
10
09-30-2015 09:18 AM
Socalstillen
4th Generation Maxima (1995-1999)
1
09-26-2015 12:01 PM



Quick Reply: help me construct my exhaust system



All times are GMT -7. The time now is 08:38 PM.