4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Max is making a funny noise

Thread Tools
 
Search this Thread
 
Old Aug 19, 2002 | 05:12 AM
  #1  
i999Maximagirl's Avatar
Thread Starter
Donating Maxima.org Member
iTrader: (2)
 
Joined: Nov 2000
Posts: 786
Max is making a funny noise

When I have the car in 1st or reverse and let off the clutch the car makes a vibrating noise when it begins to move, almost like something is loose under the car but you can feel the pulsing in the pedal. The car also makes the same noise when starting. Delio and I checked the car to see if anything was loose but from the looks of it everything is in place all we could see was that when the car makes this noise my front wheel "shutters". We've been told that it could possibly be my motor or tranny mounts, any other ideas as to what could be causing this weird noise?

Christine
Old Aug 19, 2002 | 05:59 AM
  #2  
njmaxseltd's Avatar
Member who somehow became The President of The SE-L Club
iTrader: (19)
 
Joined: Jun 2001
Posts: 16,024
By any chance, your you a 5 speed with an ACT clutch?
Old Aug 19, 2002 | 06:23 AM
  #3  
i999Maximagirl's Avatar
Thread Starter
Donating Maxima.org Member
iTrader: (2)
 
Joined: Nov 2000
Posts: 786
still on factory clutch, flywheel etc
Old Aug 19, 2002 | 09:33 AM
  #4  
Lime's Avatar
Donating Maxima.org Member
 
Joined: Apr 2001
Posts: 4,154
hmmmm...you have ABS right? Does it feel like that?

On another idea...do you have a udp?
Old Aug 19, 2002 | 10:29 AM
  #5  
njmaxseltd's Avatar
Member who somehow became The President of The SE-L Club
iTrader: (19)
 
Joined: Jun 2001
Posts: 16,024
Check your engine mounts.

Open the hood and have a friend watch your engine. Start the car, apply the brake and put your car in reverse. While keeping your brakes applied, give some gas. Your engine should stay put. It may move slightly from the torque but not much at all. Repeat this procedure in drive to check the mounts on the other side of the engine. Once again, your engine shouldn't move. If you see it lift up, your engine mounts are toast!
Old Aug 19, 2002 | 11:13 AM
  #6  
delio's Avatar
Supporting Maxima.org Member
iTrader: (11)
 
Joined: Aug 2000
Posts: 2,799
From: New Windsor, NY
Originally posted by njmaxseltd
Check your engine mounts.

Open the hood and have a friend watch your engine. Start the car, apply the brake and put your car in reverse. While keeping your brakes applied, give some gas. Your engine should stay put. It may move slightly from the torque but not much at all. Repeat this procedure in drive to check the mounts on the other side of the engine. Once again, your engine shouldn't move. If you see it lift up, your engine mounts are toast!

What if she has a 5 speed as per her previous posts
Old Aug 19, 2002 | 02:41 PM
  #7  
sinewave's Avatar
Senior Member
 
Joined: Jan 2001
Posts: 1,277
Sounds like clutch chatter to me; usually caused by a faulty pressure plate. If so, you will probably have to replace the clutch assembly and very possibly have the flywheel resurfaced.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
boomerbrian
5th Generation Maxima (2000-2003)
4
Nov 8, 2015 05:10 PM
02nissmax
7th Generation Maxima (2009-2015)
6
Sep 5, 2015 01:50 PM
MaximaDrvr
7th Generation Maxima (2009-2015)
16
Aug 19, 2015 08:20 PM
egali045
5th Generation Maxima (2000-2003)
7
Aug 16, 2015 01:19 PM
kirkhilles
5th Generation Maxima (2000-2003)
2
Aug 8, 2015 10:53 AM




All times are GMT -7. The time now is 01:38 PM.