Finally My Variable Intake works!!!! Oh LORD!!
#1
Finally My Variable Intake works!!!! Oh LORD!!
Ok , after I find that the 3/8 inch hose I had was to big and leaked, I went down to 1/8 inch hose.
Then I found I had 2 bad grounds and a bad splice point, all due to corrision.
Then I found that the rod that holds all the butterfly valves was slightly bent and not allowing the butterfly valves to close.
Well 1 week after I started my VI works like a champ.
And after a 10 minute ride in my automatic.. I really like 2nd gear
I will find out more later. The dyno is about a 2 weeks down the road.
Thanks to Mrcranman who sold it to me. Thanks to speedtrip, mardigras, ant97se, mishmosh, nealoc187 ( sorry if I misspelled it) , Ians, xhypex, and some people I am sure I forgot.
If you don't have one.. fake your own death and buy one with the insurance money
YES IT IS THAT GOOD TO ME.
It shifted so hard into 2nd and 3rd gear at 6600 rpm's, I thought my dash board was going to fall into my lap. NO I do not have the VB mob.
Then I found I had 2 bad grounds and a bad splice point, all due to corrision.
Then I found that the rod that holds all the butterfly valves was slightly bent and not allowing the butterfly valves to close.
Well 1 week after I started my VI works like a champ.
And after a 10 minute ride in my automatic.. I really like 2nd gear
I will find out more later. The dyno is about a 2 weeks down the road.
Thanks to Mrcranman who sold it to me. Thanks to speedtrip, mardigras, ant97se, mishmosh, nealoc187 ( sorry if I misspelled it) , Ians, xhypex, and some people I am sure I forgot.
If you don't have one.. fake your own death and buy one with the insurance money
YES IT IS THAT GOOD TO ME.
It shifted so hard into 2nd and 3rd gear at 6600 rpm's, I thought my dash board was going to fall into my lap. NO I do not have the VB mob.
#2
Supporting Maxima.org Member
iTrader: (38)
Join Date: Dec 2000
Location: Near Archer High School, Ga
Posts: 6,451
Re: Finally My Variable Intake works!!!! Oh LORD!!
so you did have everything hooked up properly!!!
and the little thing was bent!!weird, but congrats,
is on now, come out this sunday and show the folks. I want one but wont be able to get it until next year , well hope you stick around and lets do that big project we been talking about when you get a job!!
and the little thing was bent!!weird, but congrats,
is on now, come out this sunday and show the folks. I want one but wont be able to get it until next year , well hope you stick around and lets do that big project we been talking about when you get a job!!
#4
Sweet!!! I'm glad you worked it all out. It seems like most of the problems we're experiencing with the VI are due to the installer (us) and not the product. I'm glad you sorted it all out. I know I had a couple "bugs" too.
What switchover did you use? Can you hear a different intake sound once the VI is fully activated?
Dave
What switchover did you use? Can you hear a different intake sound once the VI is fully activated?
Dave
#6
jay- yeah everything was good just that rod was bent.. maybe we can work it ALL out next year
ben... your a cutie
dave.. the ONLY problems I had were caused by ME... so your correct in that statement.. I am at 4800 rpms..just plugged something in there. I can barley tell a difference.. I have a CAI it seems to be making less noise.. I have not really payed attention to busy looking at the road .. I will pay more attention and let you know what I am finding
cumalot- yes finally..
ben... your a cutie
dave.. the ONLY problems I had were caused by ME... so your correct in that statement.. I am at 4800 rpms..just plugged something in there. I can barley tell a difference.. I have a CAI it seems to be making less noise.. I have not really payed attention to busy looking at the road .. I will pay more attention and let you know what I am finding
cumalot- yes finally..
#9
Congrats man
Glad to hear you got it working finally. I am hoping to start this project on Sunday with redmaxpa007 helping me out.
Are there any extra parts that you needed:
Hoses, gaskets etc.
I do have the list of the items needed to make the vacuum work.
Also, where did you get you rmap baro switch from?
Thanks in advance!
DL
Are there any extra parts that you needed:
Hoses, gaskets etc.
I do have the list of the items needed to make the vacuum work.
Also, where did you get you rmap baro switch from?
Thanks in advance!
DL
#11
gawddayum!! I think I'm getting ME/VI envy
Congrats bags!
After I start modding this puppy (next year, no money this year) this VIM is definitely gonna be on the list.
Important Question: is the supply for these things good or do I seriously need to order it now?
Congrats bags!
After I start modding this puppy (next year, no money this year) this VIM is definitely gonna be on the list.
Important Question: is the supply for these things good or do I seriously need to order it now?
#12
Supporting Maxima.org Member
iTrader: (38)
Join Date: Dec 2000
Location: Near Archer High School, Ga
Posts: 6,451
Stevtec prepare yourself to wait at least 5-6 weeks plus!!!seriously, I may get one hopefully this december or when Ian starts a GD again. Iansw said he was going to start another GD in the near future!!!
Thread
Thread Starter
Forum
Replies
Last Post
jerrod99_se-l
4th Generation Classifieds (1995-1999)
2
08-27-2015 08:27 PM
sonic7
7th Generation Classifieds (2009-2015)
8
08-20-2015 12:23 PM
MaximaDrvr
7th Generation Maxima (2009-2015)
16
08-19-2015 08:20 PM