Instructions for Building the Bulge Mesh Grill for '97-'99 Maximas
10-31-2002 | 09:17 AM
#1
Instructions for Building the Bulge Mesh Grill for '97-'99 Maximas
I've finally finished creating my step-by-step instructions in MS Word, complete with pictures. It is 3Mb in size. Hotmail will not take anything greater than 1024K maximum.
With a new job and all, I just don't have the time to make these on the side anymore and so I'm sharing the knowledge with you all.
Please note that this is only for the grill between the headlights. The small, narrow opening in the bumper can be done based on the steps I've written.
The fttp posted doesn't work anymore, so just post your email addy here and I'll send it to you.
With a new job and all, I just don't have the time to make these on the side anymore and so I'm sharing the knowledge with you all.
Please note that this is only for the grill between the headlights. The small, narrow opening in the bumper can be done based on the steps I've written.
The fttp posted doesn't work anymore, so just post your email addy here and I'll send it to you.
10-31-2002 | 11:30 AM
#2
Senior Member
Joined: May 2002
Posts: 100
Re: Instructions for Building the Bulge Mesh Grill for '97-'99 Maximas
Originally posted by BlackCat
I've finally finished creating my step-by-step instructions in MS Word, complete with pictures.
I think this would make a great sticky here but I don't know how to post it. Anyhow, for those who would like me to email it to them, just send me a PM.
I've finally finished creating my step-by-step instructions in MS Word, complete with pictures.
I think this would make a great sticky here but I don't know how to post it. Anyhow, for those who would like me to email it to them, just send me a PM.
Thanks
10-31-2002 | 12:52 PM
#4
Member
Joined: Sep 2002
Posts: 88
Re: Instructions for Building the Bulge Mesh Grill for '97-'99 Maximas
Originally posted by BlackCat
I've finally finished creating my step-by-step instructions in MS Word, complete with pictures.
I think this would make a great sticky here but I don't know how to post it. Anyhow, for those who would like me to email it to them, just send me a PM.
I've finally finished creating my step-by-step instructions in MS Word, complete with pictures.
I think this would make a great sticky here but I don't know how to post it. Anyhow, for those who would like me to email it to them, just send me a PM.
10-31-2002 | 01:09 PM
#6
Senior Member
Joined: Jan 2002
Posts: 2,007
Re: Instructions for Building the Bulge Mesh Grill for '97-'99 Maximas
Originally posted by BlackCat
I've finally finished creating my step-by-step instructions in MS Word, complete with pictures.
Please note that this is only for the grill between the headlights. The small, narrow opening in the bumper can be done based on the steps I've written.
I think this would make a great sticky here but I don't know how to post it. Anyhow, for those who would like me to email it to them, just PM me your email address.
I've finally finished creating my step-by-step instructions in MS Word, complete with pictures.
Please note that this is only for the grill between the headlights. The small, narrow opening in the bumper can be done based on the steps I've written.
I think this would make a great sticky here but I don't know how to post it. Anyhow, for those who would like me to email it to them, just PM me your email address.
10-31-2002 | 02:05 PM
#11
Junior Member
Joined: Aug 2002
Posts: 16
Re: Instructions for Building the Bulge Mesh Grill for '97-'99 Maximas
looks real tight hit me at wsdunc024@yahoo.com or wade.duncan@bankofamerica.com with the instructions. Much appreciated
Originally posted by BlackCat
I've finally finished creating my step-by-step instructions in MS Word, complete with pictures.
With a new job and all, I just don't have the time to make these on the side anymore and so I'm sharing the knowledge with you all.
Please note that this is only for the grill between the headlights. The small, narrow opening in the bumper can be done based on the steps I've written.
I think this would make a great sticky here but I don't know how to post it. Anyhow, for those who would like me to email it to them, just PM me your email address.
I've finally finished creating my step-by-step instructions in MS Word, complete with pictures.
With a new job and all, I just don't have the time to make these on the side anymore and so I'm sharing the knowledge with you all.
Please note that this is only for the grill between the headlights. The small, narrow opening in the bumper can be done based on the steps I've written.
I think this would make a great sticky here but I don't know how to post it. Anyhow, for those who would like me to email it to them, just PM me your email address.
10-31-2002 | 02:32 PM
#13
Senior Member
Joined: May 2002
Posts: 383
10-31-2002 | 02:36 PM
#14
Originally posted by J Steed
id like to just buy one
f the instructions
id like to just buy one
f the instructions
10-31-2002 | 02:42 PM
#15
Ok I got the file. If anyone wants to pull it off, just go to ftp://64.129.133.233
10-31-2002 | 02:49 PM
#16
Originally posted by mb1
Ok I got the file. If anyone wants to pull it off, just go to ftp://64.129.133.233
Ok I got the file. If anyone wants to pull it off, just go to ftp://64.129.133.233
10-31-2002 | 02:53 PM
#17
Guest
Posts: n/a
10-31-2002 | 02:59 PM
#18
Sup man, i would like to get the instructions on how to do that as well...my email is NismoTam@aol.com
10-31-2002 | 07:01 PM
#19
Originally posted by mb1
Ok I got the file. If anyone wants to pull it off, just go to ftp://64.129.133.233
Ok I got the file. If anyone wants to pull it off, just go to ftp://64.129.133.233
mb1, thanks for the ftp hosting!
BlackCat, great instructions, man. Only thing better would be on a web site.
10-31-2002 | 09:43 PM
#20
Supporting Maxima.org Member
Joined: Sep 2002
Posts: 233
looks amazing! send me the write up
an8021@comcast.net
an8021@comcast.net
11-02-2002 | 01:52 AM
#24
Senior Member
Joined: Aug 2001
Posts: 661
I've been waiting for this for a long time and couldn't believe someone actually write a instruction, this is so good. I've saved it to my harddrive!
by the way, you should put the very first pic (the whole front grill) in this thread in this post to the instruction.
by the way, you should put the very first pic (the whole front grill) in this thread in this post to the instruction.
11-02-2002 | 04:45 AM
#25
Senior Member
Joined: Oct 2000
Posts: 539
Send them to me nparker@apollo-hvac.com
11-02-2002 | 07:24 AM
#27
Can you please send them to blkmax98se@aol.com
11-02-2002 | 02:39 PM
#28
Originally posted by mb1
Ok I got the file. If anyone wants to pull it off, just go to ftp://64.129.133.233
Ok I got the file. If anyone wants to pull it off, just go to ftp://64.129.133.233
11-02-2002 | 02:43 PM
#29
Originally posted by tzmanles
Hey, i tried saving the file off of ur ftp site. When I tried opening it it gave me an error saying 'the document name or path is invalid'. It gives suggestions to check the file permissions or use the file/open method of opening the document.Can u help me
Hey, i tried saving the file off of ur ftp site. When I tried opening it it gave me an error saying 'the document name or path is invalid'. It gives suggestions to check the file permissions or use the file/open method of opening the document.Can u help me
YOu need Microsoft word to view this file.
11-03-2002 | 01:29 PM
#34
Supporting Maxima.org Member
Joined: Apr 2002
Posts: 796
oooers, I want em too, I was just thinking about doing this, again, while on a smoke break.
maxima@afexstyle.com
maxima@afexstyle.com
11-03-2002 | 07:54 PM
#38
Originally posted by maximaah
Hold on, guys, a smaller pdf is in the works....
Hold on, guys, a smaller pdf is in the works....
http://www.vqpower.com/v2/modules.ph...howpage&pid=38
11-06-2002 | 08:31 AM
#40
Btw is it possible to put in the missing arrows and stars in the "Attaching the Mesh to the Grill" section?