4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Installed New Battery, now Viper Alarm wont go off and other things dont work, HELP..

Thread Tools
 
Search this Thread
 
Old 11-22-2002, 10:06 PM
  #1  
Newbie - Just Registered
Thread Starter
 
frizzboy70's Avatar
 
Join Date: Oct 2002
Posts: 10
Installed New Battery, now Viper Alarm wont go off and other things dont work, HELP..

So, my battery died today on my 99 Maxima SE. I buy a new one, install it and as soon as the cables touch the posts my Viper 300ESP starts going off at a very low volume. I try to disarm, but nothing doing. I've already raised the hood, opened the doors and set off every possible trigger at this point. I try to start the car and nothing. Apparently this alarm has an ignition kill switch that I wasnt even aware of. I finally jump my brand new battery off my other car, and the Maxima starts. However, the A/C, stereo, hazards, rear defrost, and rear lights do not work. My headlights, brake lights, interior lights do work though. So, I get the car home, turn it off and the friggin alarm is still going off at a very low volume. I'm at a loss. I guess I will take it to the shop that installed the alarm and have them check it out. Any ideas from anyone here would be appreciated.
frizzboy70 is offline  
Old 11-24-2002, 04:57 PM
  #2  
Supporting Maxima.org Member
iTrader: (13)
 
ThurzNite's Avatar
 
Join Date: Oct 2000
Posts: 8,489
Sounds like the alarm drained the battery? And the new battery isn't "new"? I don't understand why jumping the new battery would work? I would pull the harness off the Viper and try starting the car...see if everything in the car is ok. If everything checks out, plug the Viper back in and go from there. Vipers suck...you pull the brain and you can start the car.
Jae
ThurzNite is offline  
Old 11-24-2002, 05:26 PM
  #3  
Senior Member
 
ny96max's Avatar
 
Join Date: Oct 2000
Posts: 5,809
Originally posted by ThurzNite
Sounds like the alarm drained the battery? And the new battery isn't "new"? I don't understand why jumping the new battery would work? I would pull the harness off the Viper and try starting the car...see if everything in the car is ok. If everything checks out, plug the Viper back in and go from there. Vipers suck...you pull the brain and you can start the car.
Jae
sounds like more than the alarm in his situation is screwy.

Ant
ny96max is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jerrod99_se-l
4th Generation Classifieds (1995-1999)
2
08-27-2015 08:27 PM
Viralkill
7th Generation Maxima (2009-2015)
1
08-17-2015 10:54 AM
Viralkill
General Maxima Discussion
2
08-16-2015 05:09 PM
Superbform
Audio and Electronics
1
08-11-2015 08:10 PM
kenc15
5th Generation Classifieds (2000-2003)
0
08-05-2015 08:29 AM



Quick Reply: Installed New Battery, now Viper Alarm wont go off and other things dont work, HELP..



All times are GMT -7. The time now is 08:44 AM.