HID install help

Reply Subscribe

Thread Tools

Search this Thread

12-30-2002, 06:27 PM

MaxMoJo

Former Sponsor

Thread Starter

iTrader: (43)

Join Date: Mar 2001

Location: Queens

Posts: 2,179

HID install help

Ok, I finally got my "made in taiwan" HID kit to work. Thanks to Lime's suggestion of reversing the wires. That helped but I had to cut the red wires that were looped from high - low. Now, I spliced it so that it works on either high beam or low beam.
Here is the question...
Now the high beam indicator is constantly on. Is this normal? If not, how can I fix it?

Thanks in advance.

12-31-2002, 12:11 AM

jcy98maxse

Turbo is too much fun!

iTrader: (8)

Join Date: Apr 2002

Posts: 2,515

Re: HID install help

Quote:

Originally posted by MaxMoJo
Ok, I finally got my "made in taiwan" HID kit to work. Thanks to Lime's suggestion of reversing the wires. That helped but I had to cut the red wires that were looped from high - low. Now, I spliced it so that it works on either high beam or low beam.
Here is the question...
Now the high beam indicator is constantly on. Is this normal? If not, how can I fix it?

Thanks in advance.

This happen to me when I redid my harness when I old one burned up, the reason was having the connections switched around i.e. ground going to high beam or low beam connected to ground etc... but sound like to me you had to reverse the wires on purpose so I dunno if it could be fix.