Greddy Cat Back
02-25-2003, 02:33 PM
#1
Senior Member
Thread Starter
Join Date: Jun 2001
Posts: 174
Greddy Cat Back
I had my greddy catback put in, but it sticks almost 2 inches from the cutout in the bumper. Is there anyway to remedy this a cheap way....like having something unimportant cutback a bit or something?
02-25-2003, 04:18 PM
#2
Re: Greddy Cat Back
Hmmm... this usually only happens when you put a 97-99 greddy onto a 95-96. In any case, the pipe that links the muffler to the tip can be cut. You then enlarge the pipe of the tip end and fit it over the pipe on the muffler end. Then you just solder.
Any muffler shop should be able to do this for $30 or so. It is a real b!tch to cut that muffler pipe though.
Any muffler shop should be able to do this for $30 or so. It is a real b!tch to cut that muffler pipe though.
02-26-2003, 02:36 PM
#3
Senior Member
Thread Starter
Join Date: Jun 2001
Posts: 174
Re: Re: Greddy Cat Back
Originally posted by Mishmosh
Hmmm... this usually only happens when you put a 97-99 greddy onto a 95-96. In any case, the pipe that links the muffler to the tip can be cut. You then enlarge the pipe of the tip end and fit it over the pipe on the muffler end. Then you just solder.
Any muffler shop should be able to do this for $30 or so. It is a real b!tch to cut that muffler pipe though.
Hmmm... this usually only happens when you put a 97-99 greddy onto a 95-96. In any case, the pipe that links the muffler to the tip can be cut. You then enlarge the pipe of the tip end and fit it over the pipe on the muffler end. Then you just solder.
Any muffler shop should be able to do this for $30 or so. It is a real b!tch to cut that muffler pipe though.
Thread
Thread Starter
Forum
Replies
Last Post
Justin Kroll
5th Generation Maxima (2000-2003)
7
09-02-2015 11:06 AM
sonic7
7th Generation Classifieds (2009-2015)
8
08-20-2015 12:23 PM