Can someone provide the torque specs for the pressure plate and flywheel bolts please. It would be greatly appreciated.

-christian

 

my haynes manual says to torque the driveplate/flywheel bolts to 61-69 ft/lbs and the pressure plate 25-33 ft/lbs

Brett

 

Thanks for the help!

This is why the .org is good.

-ctn

 

according to the factory service manual for my 97 maxima, the recommended torque value is 61-69 ft-lbs. this is for either the flywheel with signal plate(M/T models) or the drive plate with signal plate(A/T models). hope this helps.