blue lights
#1
hot mood lighting
ok i heard that some of you guys have done this so i was wondering how to change the lights on my window buttons to blue and also the dome light and trunk light and install information will be of great help and any #s for the lights i need to get would be great too....thanks
#3
Originally Posted by my99maxisnice
For changing the window lights...go to the sticky '4th Gen How To's' , a great new sticky. As for the others, can't help you there.
#4
For the rest of the lamps, go to www.superbrightleds.com, they have tons of LED products....
#6
Originally Posted by SXN
good resource link, whats a good local place (auto store, radio shack, etc) to get some bright LEDs?
http://www.radioshack.com/product.as...5Fid=276%2D316
#13
Originally Posted by LastBoyScout
NOOOOOO, huge waste of money!!!
Get LEDs on ebay straight from Hong Kong from the vendor "cwithk"
I have purchased a total of 700 LEDs from him, he's the best!!
-Tony
#14
Originally Posted by LastBoyScout
Can't you tell i was joking about saying you didnt know i was joking?
Thanks for the suggestion Affario, i'll give that a shot, i need some blue LEDs for my window switches, security light, etc
#16
Originally Posted by SXN
instead of saying "couldnt you tell that i could tell that you were joking about saying i didnt know you were joking" im going to say... no.
Thanks for the suggestion Affario, i'll give that a shot, i need some blue LEDs for my window switches, security light, etc
Thanks for the suggestion Affario, i'll give that a shot, i need some blue LEDs for my window switches, security light, etc
-Tony
#19
I needed a TON of LEDs for a secret custom project I am in the process of completing. Everyone is gonna FREAK when I reveal this one!!!! I'll post pics in a couple weeks when I'm finished
-Tony
-Tony
#22
Originally Posted by araffio
Exterior....like nothing EVER done on a Maxima before...taken me over 50 hours so far...
-Tony
-Tony
#28
well, its a small area, so even with experience i would rate it a 2. only soldering i had done prior was big wires to big wires... so i had more trouble, i would say a 3 rating (mainly cuz i got frustrated)
#30
Originally Posted by araffio
Not even close....
-Tony
-Tony
You said to "Get LEDs on ebay straight from Hong Kong from the vendor "cwithk""
I will definatly do that....
Besides, why would you want to spend all that time making custom LED bulbs for all of your lights? That is alot of PC board, solder, and resistors.......
Hope you got the voltage stepping right.....
#31
Originally Posted by LastBoyScout
Man....you are the first guy i have ever seen with the LED's int he Door handles. I use to have them in my Sentra like that, and was just trying to get a Good LED deal somewhere....
You said to "Get LEDs on ebay straight from Hong Kong from the vendor "cwithk""
I will definatly do that....
Besides, why would you want to spend all that time making custom LED bulbs for all of your lights? That is alot of PC board, solder, and resistors.......
Hope you got the voltage stepping right.....
You said to "Get LEDs on ebay straight from Hong Kong from the vendor "cwithk""
I will definatly do that....
Besides, why would you want to spend all that time making custom LED bulbs for all of your lights? That is alot of PC board, solder, and resistors.......
Hope you got the voltage stepping right.....
Don't you worry, it's coming out better than planned. Yes, it is a lot of everything...
but who said that I am making custom LED bulbs for all my lights??? I never said that....
-Tony
#36
Originally Posted by araffio
No way will I mass produce this. If someone really wants me to do this mod for them, I wouldn't even think of doing it for under $600, just takes way too much of my time.
-Tony
-Tony
also...cost per LED.......
and do you remember how many it took to do your car on replacement??
Just trying to get a list going......
#37
I will not be doing a write up on this. To be honest, if someone wants to have this on their Maxima, it would be up to them to figure it out This isn't something I want to see popping up everywhere. It is a one off with the exception of a friend of mine who I will be doing it for.
Cost per LED was roughly $.20 on ebay
-Tony
Cost per LED was roughly $.20 on ebay
-Tony
#40
I wasted like $30 at Radio Shack buyin LEDs when i could of spend $10 on ebay and got 4 times the amount.(like araffio did) But I want to know is how do you change the lights next to the auto shifter????????? I could'nt get the casing off........