sup, alrite here's what happened. i decided to clean my interior of my car very throughly so i took out my whole center console... i've done it before cause i've installed my system myself... i took it apart fine... had soem problem taking off the wire to the hazard lights... so i jsut left that on after trying to take it out...

so then i go out w/ some friends and i learned that myblinkers don't work... i changed the fuse with a spare i had worked for a few times then blew... so now my blinkers don't work at least till i get a new fuse tomorrow morning...

and then i learn that my corners, bumper, and tailights do not turn on only my headlight works. my tailights come on when i brake only. and i took a fuse from somewhere else and put it into the blinker one and then the corners and bumper lenses turn on... so the corners and bumpers only turn on when blinekrs turn on...

please someone help me i was getting so frustrated... i think it has something to do w/ me trying to pull out the wires/socket that plugs into the hazard signal... please help me out. THANKS

tj

 

I think you are on the right track of finding out why your lights are on the blink. Perhaps a wire got pulled out a little and now the electrical connection (gnd,pwr etc) is no longer there. Considering what flashes when hazards are used it will probably be a good place to start. You also mention that a fuse blew. Another good indication. BTW do the hazards work? Looking at my FSM, it shows that hazards can work but turn signal don,t and also the turn signals can operate but the hazards won,t (not in your case though). Good luck!