95-96 Tail Light Replacement

Reply Subscribe

Thread Tools

Search this Thread

02-17-2004, 06:17 PM

MaximA VlaD

Senior Member

Thread Starter

iTrader: (7)

Join Date: Oct 2003

Location: Bethel, CT

Posts: 543

95-96 Tail Light Replacement

[COLOR=Navy]
OK, so here is the problem. I get my altezzas on ebay, one is broken... so i send it back and get a replacement. 4 weeks go by in the meanwhile. finally, today i got my replacement and tried taking out those FUgly stock lights. Took off all the nuts and disconnected all the cords. took out all the light bulb housings... the damn thing will not budge. I noticed that there is some black rubbery sealant around the inner tail light housing. It is tight and hard (maybe because of the cold) and difficult to pull out. So there are my lights 'glued' to my car...

any suggestions?

02-17-2004, 06:19 PM

95CustomMaxima2

Newbie - Just Registered

Join Date: Feb 2004

Posts: 8

Use a hairdryer or heat gun to heat up the glue to make for easy removal..

-Nick

02-17-2004, 06:19 PM

dr_blaqueman

Senior Member

Join Date: Mar 2003

Posts: 138

When I did mine I didn't have that problem but some people do. I have heard that if you take a hair drier and warm up the sticky stuff then it will losen them up. just a suggestion