sensor identification...
that would be the crankshaft sensor (POS).
its leaking oil? seaping out or draining?
thats odd, I dont think so sensors have a gasket on it, might need to take out and thread it with sealant the reinstall.
its leaking oil? seaping out or draining?
thats odd, I dont think so sensors have a gasket on it, might need to take out and thread it with sealant the reinstall.
Member who somehow became The President of The SE-L Club
iTrader: (19)
Joined: Jun 2001
Posts: 16,024
Originally Posted by MDeezy
that would be the crankshaft sensor (POS).
Crank position POS is located under the car on the transmission bell housing, it looks at the flywheel. Crank position REF is located on the lower pully.
Pull the sensor out and clean the sealing area, maybe put a small amount of gasket sealer on it and reinstall it. That should fix your leak.
Originally Posted by njmaxseltd
Nope, thats the camshaft angle sensor.
Crank position POS is located under the car on the transmission bell housing, it looks at the flywheel. Crank position REF is located on the lower pully.
Pull the sensor out and clean the sealing area, maybe put a small amount of gasket sealer on it and reinstall it. That should fix your leak.
Crank position POS is located under the car on the transmission bell housing, it looks at the flywheel. Crank position REF is located on the lower pully.
Pull the sensor out and clean the sealing area, maybe put a small amount of gasket sealer on it and reinstall it. That should fix your leak.
yup your right. . . checked haynes
Thread
Thread Starter
Forum
Replies
Last Post
TallTom
5th Generation Maxima (2000-2003)
57
Oct 14, 2025 05:16 PM
my03maxima
7th Generation Maxima (2009-2015)
9
Jul 28, 2024 07:40 AM
Kyle Lee Cleveland
6th Generation Maxima (2004-2008)
1
Sep 28, 2015 09:01 PM