Was wondering about installing the Unorthodox Underdrive Pulley. Looking for a write up and feed back from others that have install this. I can seem to find any write ups. If not stalling my self what kind of price would i look to pay someone for there services? What do other think of the price of that mod and how it saves the conponets.

 

It can be a pain in the a$$ job to do, there is a fifth gen write up in the 5thgen how to sticky section.

I broke my belt tensionor when installing mines and that sucked.
also with out air tools it is Pain to take off the main bolt

o and when you do it , change the seal behind it to.

 

Yeah I have the Unorthdox Underdrive Pulley and the place I got it installed said that its really anoying to do.

 

ok change seal and pain in the a$$, so what would i look to pay 50-75 for install?

 

It's not THAT much of a pain in the a$$. The hardest part is dealing with the power steering belt.

There are two easy ways to get the main crank bolt off.

1) impact wrench

2) unplug all the ignition coils, put a breaker bar on the bolt, brace the breaker bar against the floor (pointing towards the front of the car), crank the starter

 

Hammer it down the OT style!

 

Is it worth it, is there that much to gain from an underdrive pulley?

 

http://www.motorvate.ca/mvp.php/521


just read about it here