window switch pins
#1
window switch pins
was doing LED window switch mod and took it all apart and what not. I was putting it back together and noticed the pins that press down on the rubber which presses on the circuit board were all there except one. Im assuming i somehow lost one..i havent tried plugging it in because i dont think i could roll the window back up (driver side window switch) after rolling it down.
its driving me crazy ive been looking everywhere.
where could i purchase this PIN if i had to?
its driving me crazy ive been looking everywhere.
where could i purchase this PIN if i had to?
#2
either find someone with a broken switch or make your own. when i tried getting that thread together for the one touch up mod to work, which it doesn't on 4th gens , i found a thread on the altimas.net forum and some guy made his own with some small nail. he just cut it to the right size and said it worked fine. that might be a cheap and easy option for you...goodluck
#6
ive got 11 out of the 12 holes filled. the one i dont have filld is for the drivers side switch. it is one of the back ones (which wold be triggered when rolling the window back up)
#9
in a non mr.obvious sorta way, just put them in there and play with the other side and figure out which one really isn't needed. that's how i figured it out after they all fell out. one of them seems to not be neccessary iirc.
or just make one like i suggested above.
or just make one like i suggested above.
Thread
Thread Starter
Forum
Replies
Last Post
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
09-29-2015 02:02 PM