so what u gonna do to ur car this summer?
Originally Posted by Turbo1er
If they where available for the 95-96's, that would be nice!
Konak85, his is readily available, good luck finding red/clears under $400, 97-99 dont have to worry about that.
The "under $400" was Ebay end of auction pricing
Konak85, his is readily available, good luck finding red/clears under $400, 97-99 dont have to worry about that.
The "under $400" was Ebay end of auction pricing

Red/Clears (done)
AE Headlights (this weekend)
replace 15" sawblades (done, 17" Konig Prophets in the mail)
Y Pipe (lookin at warpseed for next paycheck)
Tint (leather sucks in the summer, lookin for good shop)
Stereo upgrade (give Bose some more bump and custom box, and possible new headunit)
spoiler (lookin for new trunk to do swap)
No more 4x4 (either some CO's or tein s and illuminas, if i get the money)
Finish carputer (almost done, need screen... maybe save this for winter)
AE Headlights (this weekend)
replace 15" sawblades (done, 17" Konig Prophets in the mail)
Y Pipe (lookin at warpseed for next paycheck)
Tint (leather sucks in the summer, lookin for good shop)
Stereo upgrade (give Bose some more bump and custom box, and possible new headunit)
spoiler (lookin for new trunk to do swap)
No more 4x4 (either some CO's or tein s and illuminas, if i get the money)
Finish carputer (almost done, need screen... maybe save this for winter)
Well, being only 15, and not having a job, money is tight. Although, I plan on shaving the back emblems. Also, I want to put a head-unit, and some new speakers in as well. Hopefully, I'll get a job in a couple months, and then I'm doing a complete exhaust overhaul, along with an air intake. Many more mods to come in the future though...
As of now it needs:
Radiator
Shocks and springs
Rotors and pads
After that, if I don't sell it I'll:
Tint 5%
18" 04 Max rims
Y-pipe
Catback (maybe)
Either way, over the summer the plan is to sell it and get a 5.5gen.
Radiator
Shocks and springs
Rotors and pads
After that, if I don't sell it I'll:
Tint 5%
18" 04 Max rims
Y-pipe
Catback (maybe)
Either way, over the summer the plan is to sell it and get a 5.5gen.
STS/shift ****
FSTB
Ground wires (all the above is on the way)
TIRES!!! (Probably will go with BFGoodrich Traction T/A's or Bridgestone Potenza's)
At least a catback exhaust to get rid of exhaust leak, maybe a y-pipe along with it.
Spring/strut combo if time/money/future college budget allows.
Oh yeah, and getting a Porter Cable w/ Sonus cutting pad kit, and using 3M swirl mark remover, some kind of polish, blahblahblah.
FSTB
Ground wires (all the above is on the way)
TIRES!!! (Probably will go with BFGoodrich Traction T/A's or Bridgestone Potenza's)
At least a catback exhaust to get rid of exhaust leak, maybe a y-pipe along with it.
Spring/strut combo if time/money/future college budget allows.
Oh yeah, and getting a Porter Cable w/ Sonus cutting pad kit, and using 3M swirl mark remover, some kind of polish, blahblahblah.
Originally Posted by rmurdoch
Everybody who doesn't already have a Haynes manual, or alternatively Chilton's, should buy one and become conversant with it. There will be no book report in September.
My list:
Tune up-plugs and fuel filter
Brakes-Front Rotors and pads and back pads
Suspension-Mounts, Tokico Struts,maxspeed springs, and sway bars
y pipe-Warpspeed and O2 sensors
Intake-Done
and possibly clutch slave cylinder thats starting to give out
Tune up-plugs and fuel filter
Brakes-Front Rotors and pads and back pads
Suspension-Mounts, Tokico Struts,maxspeed springs, and sway bars
y pipe-Warpspeed and O2 sensors
Intake-Done
and possibly clutch slave cylinder thats starting to give out
hopefully i can get to most of this but my mom gives me a bad look every time fedex drops off a package with some part for the MAX. i feel guilty too with college in the every nearing future, but it is hard to say when to stop.
oh well, here goes:
Illuminas/S-Techs
Bumpstops
Long Travel Rear Mounts
2.5 custom b-pipe (Or budget SS)/Muffler or OBX Catback
either Skyline paint mod to altezza tails or red out stock tails
STS
i really hope that i can stop there.
oh well, here goes:
Illuminas/S-Techs
Bumpstops
Long Travel Rear Mounts
2.5 custom b-pipe (Or budget SS)/Muffler or OBX Catback
either Skyline paint mod to altezza tails or red out stock tails
STS
i really hope that i can stop there.
Viper 791
System (still undecided on what speakers... def a JL W7 sub though)
Tokico Illumnas with H&R lowering springs
Rims (undecided... gonna be 18's though)
Sway bar
Front strut tower brace
That's all the major ones I can think of...
System (still undecided on what speakers... def a JL W7 sub though)
Tokico Illumnas with H&R lowering springs
Rims (undecided... gonna be 18's though)
Sway bar
Front strut tower brace
That's all the major ones I can think of...
Originally Posted by BigLou93SE
STS/shift ****
FSTB
Ground wires (all the above is on the way)
TIRES!!! (Probably will go with BFGoodrich Traction T/A's or Bridgestone Potenza's)
At least a catback exhaust to get rid of exhaust leak, maybe a y-pipe along with it.
Spring/strut combo if time/money/future college budget allows.
Oh yeah, and getting a Porter Cable w/ Sonus cutting pad kit, and using 3M swirl mark remover, some kind of polish, blahblahblah.
FSTB
Ground wires (all the above is on the way)
TIRES!!! (Probably will go with BFGoodrich Traction T/A's or Bridgestone Potenza's)
At least a catback exhaust to get rid of exhaust leak, maybe a y-pipe along with it.
Spring/strut combo if time/money/future college budget allows.
Oh yeah, and getting a Porter Cable w/ Sonus cutting pad kit, and using 3M swirl mark remover, some kind of polish, blahblahblah.
-tranny *power* flush (tommorow)
-tein s-techs (on their way)
-some 18's
-new 10" subs
-OEM fog's
-stillen front lip
-7" microvision
IN THAT ORDER
hopefully done before september, then call it quits, and then focus on getting my eclipse running 12's, meanwhile driving the max.
-tein s-techs (on their way)
-some 18's
-new 10" subs
-OEM fog's
-stillen front lip
-7" microvision
IN THAT ORDER
hopefully done before september, then call it quits, and then focus on getting my eclipse running 12's, meanwhile driving the max.
Just did:
y-pipe
plugs
cleaned k&n
hacked airbox
to-do:
-CAI (or maybe i'll just remove a few keys from my keychain for the same effect)
-RSB
-FSTB
-new tires for my sawblades
-Bored TB?
-fuel filter
-Get some 14.X runs down the track at NED!
y-pipe
plugs
cleaned k&n
hacked airbox
to-do:
-CAI (or maybe i'll just remove a few keys from my keychain for the same effect)
-RSB
-FSTB
-new tires for my sawblades
-Bored TB?
-fuel filter
-Get some 14.X runs down the track at NED!
BBK
Carbon Fiber Hood
Red/Clear
replace driver side fender.
eventually... supercharge. looks like its going to be enxt summer. i was aiming for this summer... errr
edit. and get my A/C fixed. someone on the org kind of punctured it... cough... cough.. you know who you are
Carbon Fiber Hood
Red/Clear
replace driver side fender.
eventually... supercharge. looks like its going to be enxt summer. i was aiming for this summer... errr
edit. and get my A/C fixed. someone on the org kind of punctured it... cough... cough.. you know who you are
Thread
Thread Starter
Forum
Replies
Last Post
Lakersallday24
6th Generation Maxima (2004-2008)
10
Jun 16, 2019 01:35 AM
kjlouis
4th Generation Maxima (1995-1999)
11
Nov 24, 2018 06:09 AM
erniel
7th Generation Maxima (2009-2015)
1
Aug 8, 2015 09:32 AM




