nismo2ner

iTrader: (1)

Can i please have info or point me where i can find info on putting a 01 tranny in my 95 is it better? stronger built?? what are the positive gains and negitive thigns about it... is it a direct fit or is there things that im going to need?? I have my tranny out and apart...

Any info and feedback is great

Thanks

Check out the pics of my busted tranny at http://forums.maxima.org/showthread.php?t=408396

Tim

mansurxk

iTrader: (14)

you need a speed sensor from the 01, 3rd gear is stronger. if its the LSD< then you need an LSD driver side axle.

THT

iTrader: (8)

Your shifter will also sit further back.

nismo2ner

iTrader: (1)

Thats not that bad then i thought there was going to be lots of stuff to do ..... is that good that the shifter sits back farther??

mansurxk

iTrader: (14)

its not a good or bad thing, depneds on if you like it or not. but it wont effect anything

nismo2ner

iTrader: (1)

aright cool cool thanks so all i need is the speed senser for the 01 max

Thanks

liqidvenom

iTrader: (6)

i have the 5th gen tranny in my car and i dont know what the guys in post 2 & 3 are talking about

Mishmosh

iTrader: (3)

If you buy the tranny, it will probably come with the speed sensor installed in it. For whatever reason, my 01 came with a factory cap on the speed sensor port so I just used my 1995 one. The tranny shifting feel is definitely better. The shifter **** sits about an inch behind--a good thing with most STS. Personally, I would do the 5th gen swap over a rebuild any day. If you get the non-locking tranny, you can use both your axles. It's just a shame 5th gen trannies are not as cheap as they once were. I picked up mine for around $850 shipped with 13k miles.

nismology

iTrader: (8)

They speak the truth. I take it you didn't install it yourself......

nismo2ner

iTrader: (1)

aright thanks guys i am taking in the info ... since im doing all the work myself... all info is great!!

liqidvenom

iTrader: (6)

i used the same speed sensor off my stock tranny and i also didnt have an issue with my shift **** sitting forward since i already had put in a sts

mansurxk

iTrader: (14)

have you ever checked the calibration of your speedo? it might be slightly off

Eldinhasamax

my tranni is shot and i have a 99 max and i am putting a 2000 tranni in what needs to be done to work ? or will it just fit right it

dmontzsta

iTrader: (8)

I am picking up an 00 trans for my car this week, going to put it in soon.

I hope it is just a "bolt on", we will see.