Keyless entry reprogramming questions.
06-21-2005, 12:40 PM
#1
Keyless entry reprogramming questions.
Hey everyone, I'll get straight to the point.
I ordered a keyless entry fob for my maxima, 1998 maxima SE 5-speed fully loaded with leather, bose, sunroof. I read the sticky, and followed the directions perfectly, removed the key 6 times, let the hazard blink, put the key in and ignition at ACC, then press the lock button on the remote, but no response from the car.
Is there something I did wrong? Also, after all this, I'm question if the option was ever on my car, or if a fuse might be blown, but then i thought if the fuse or if the keyless entry option was messed up in any way, would i be able to go through with the first couple steps?
The keyless entry FCC ID is A269ZUA078 ISC 700 K1359
I changed the battery in the remote aswell with the working battery from my 2000 maximas keyless entry fob. Please help.
edit - corrected the incorrect FCC ID, typo
.
I ordered a keyless entry fob for my maxima, 1998 maxima SE 5-speed fully loaded with leather, bose, sunroof. I read the sticky, and followed the directions perfectly, removed the key 6 times, let the hazard blink, put the key in and ignition at ACC, then press the lock button on the remote, but no response from the car.
Is there something I did wrong? Also, after all this, I'm question if the option was ever on my car, or if a fuse might be blown, but then i thought if the fuse or if the keyless entry option was messed up in any way, would i be able to go through with the first couple steps?
The keyless entry FCC ID is A269ZUA078 ISC 700 K1359
I changed the battery in the remote aswell with the working battery from my 2000 maximas keyless entry fob. Please help.
edit - corrected the incorrect FCC ID, typo
.
06-21-2005, 01:01 PM
#5
I think before you even start the key sex you: get in, close the door. lock all doors with the lock button . . . then go with the key, youll get hazards, turn to ACC, press lock button on key fob, you should get hazards again
06-21-2005, 01:12 PM
#7
Ok it works, apparently you have to press the lock AND unlock button after you put key into ACC (update the sticky?). Now, its press nifty with the window roll down when you hold unluck. The thing is, I'm not too sure, but does the 4th gens have the ability to beep when you lock the car? Also my panic button doesn't work. The lock, unlock, window roll down, and trunk functions all work fine, but the panic doesn't seem to work.
Next up, is there a beep-on-lock tpye thing, like on my 5th gen, when you press lock, the car locks and also the horn chirps. And also what's up with the panic feature not working?
Next up, is there a beep-on-lock tpye thing, like on my 5th gen, when you press lock, the car locks and also the horn chirps. And also what's up with the panic feature not working?
06-21-2005, 01:22 PM
#8
Originally Posted by snair2
Ok it works, apparently you have to press the lock AND unlock button after you put key into ACC (update the sticky?). Now, its press nifty with the window roll down when you hold unluck. The thing is, I'm not too sure, but does the 4th gens have the ability to beep when you lock the car? Also my panic button doesn't work. The lock, unlock, window roll down, and trunk functions all work fine, but the panic doesn't seem to work.
Next up, is there a beep-on-lock tpye thing, like on my 5th gen, when you press lock, the car locks and also the horn chirps. And also what's up with the panic feature not working?
Next up, is there a beep-on-lock tpye thing, like on my 5th gen, when you press lock, the car locks and also the horn chirps. And also what's up with the panic feature not working?
2. Are you keeping the panic button "pressed" for a few seconds - the car horn should sound if you do - you have to keep the button pressed (make sure your car horn works of course). If the horn works *from the steering wheel*, but the panic still doesn't work when you try what I described above, you might have a bad panic button on the remote - get another remote, program that and see if the panic button works.
06-22-2005, 06:42 AM
#9
Newbie - Just Registered
Join Date: Mar 2001
Posts: 14
I bought a remote for my 97 years ago. I go through all the programming steps. The hazards blink then nothing. No button works on the car. I've tried pressing the unlock button after the lock, manually unlocking the car, turning the key back to the off position...nothing works. Any suggestions?
06-22-2005, 06:45 AM
#10
Originally Posted by props000
I bought a remote for my 97 years ago. I go through all the programming steps. The hazards blink then nothing. No button works on the car. I've tried pressing the unlock button after the lock, manually unlocking the car, turning the key back to the off position...nothing works. Any suggestions?
06-22-2005, 06:57 AM
#12
Originally Posted by props000
I did way back when, but not recently. I figured if the hazards were blinking it had juice left in it.
06-22-2005, 07:02 AM
#13
Newbie - Just Registered
Join Date: Mar 2001
Posts: 14
Originally Posted by njmodi
The hazards blink when you lock the car? or the hazards blink when you follow the remote programming instructions? i.e. do the hazards ever blink when you press a button on the remote (either while using or programming it)?
While following the programming instructions, the hazzards blink when it gets to the point of pressing the lock button on the remote.
06-22-2005, 07:06 AM
#14
06-22-2005, 07:07 AM
#15
Originally Posted by props000
While following the programming instructions, the hazzards blink when it gets to the point of pressing the lock button on the remote.
06-22-2005, 07:21 AM
#16
Newbie - Just Registered
Join Date: Mar 2001
Posts: 14
Originally Posted by gtr_rider
06-22-2005, 08:05 AM
#17
Guest
Posts: n/a
I bought a remote for my 97 years ago. I go through all the programming steps. The hazards blink then nothing. No button works on the car. I've tried pressing the unlock button after the lock, manually unlocking the car, turning the key back to the off position...nothing works. Any suggestions?
06-22-2005, 08:08 AM
#18
Newbie - Just Registered
Join Date: Mar 2001
Posts: 14
Originally Posted by Black Maxima
Unplug the Keyless Entry unit in the trunk, then plug it back in. There are two plugs actually. Then do the programming steps over again, if the remotes don't work right away.
06-22-2005, 08:35 AM
#20
Newbie - Just Registered
Join Date: Mar 2001
Posts: 14
Originally Posted by Black Maxima
On the right side, to the left of the jack, behind the plastic wall. Just peel down the wall a little bit to access it.
06-22-2005, 09:41 AM
#22
speaking of opening the window with the remote.
it`s funny how when i brought my maxima the first owner told me "there is a problem with the remote, if you hold the unlock button for too long the windows will roll down" (and she`s had the car for 10 years)
it`s funny how when i brought my maxima the first owner told me "there is a problem with the remote, if you hold the unlock button for too long the windows will roll down" (and she`s had the car for 10 years)
06-22-2005, 09:56 AM
#23
Guest
Posts: n/a
it`s funny how when i brought my maxima the first owner told me "there is a problem with the remote,
06-22-2005, 08:57 PM
#25
Senior Member
iTrader: (7)
Join Date: Dec 2004
Location: Alexandria, VA, & Central Jersey
Posts: 2,647
uh, my supermarket sells it. and if you're in montclair, i'm sure there's a pathmark or something there. the number is 2025. no need to go to a jeweler cause they prob won't have it. radio shack, staples, walmart, pathmark, shop rite, or A&P will have it. just look where they have the batteries. its usually like 2 to 3 bucks
Thread
Thread Starter
Forum
Replies
Last Post
trsandrew
7th Generation Maxima (2009-2015)
17
04-08-2016 06:45 PM
trsandrew
Group Deals / Sponsors Forum
2
10-25-2015 02:47 PM