what would it take to get a max in the 10s?
10-01-2005, 12:02 PM
#1
Senior Member
Thread Starter
Join Date: Sep 2004
Posts: 848
what would it take to get a max in the 10s?
just curious what it would take to get the max into the 10s 1/4 time...
would a s/c, n20,all the bolt ons they make,weight reduction and slicks get you in there....
would a s/c, n20,all the bolt ons they make,weight reduction and slicks get you in there....
10-01-2005, 12:17 PM
#5
Senior Member
Thread Starter
Join Date: Sep 2004
Posts: 848
matty what do you run right now in the 1/4?
10-01-2005, 12:19 PM
#6
Senior Member
Thread Starter
Join Date: Sep 2004
Posts: 848
and isent there someone who has an 11s max with a low shot of n20....he had a video on here beatin a zo6..iam sure if he ran a bigger shot he would be in the 10s...you guys dont think so?
10-01-2005, 01:31 PM
#14
Originally Posted by TurTLe*
^ maybe a little more then that.. =P
i think the lowest on the org is around mid 12's if anything.
i think the lowest on the org is around mid 12's if anything.
Originally Posted by THT
Lowest on the org is 11s
Mardi has run an 11.5, but that was on his old setup (VQ30, turbo, 35 shot if IIRC).
10-01-2005, 01:37 PM
#16
your definetly gonna need a 3.5 to get to 10's. I'm sure you can get to 10's it's just all about how big your wallet is. Your gonna spen a lot of money just getting components in your engine to get a lower compression rate.
question... what is the compression rate on the 3.5?
question... what is the compression rate on the 3.5?
10-01-2005, 01:37 PM
#17
Member
Join Date: Sep 2005
Posts: 72
i got it!!
go buy a new vette, put ur maxima emblems on it n presto!
just a thought...
yes im referring to the z06...
go buy a new vette, put ur maxima emblems on it n presto!
just a thought...
yes im referring to the z06...
10-01-2005, 02:20 PM
#18
Senior Member
Join Date: Jun 2005
Posts: 640
yeah cus all the new vettes run 11's stock. if anything buy a z06
10-01-2005, 02:50 PM
#20
Senior Member
Thread Starter
Join Date: Sep 2004
Posts: 848
Originally Posted by MrGone
If you have to ask you certianly will not be the one doing it.
thats made no sense but good job any way
10-01-2005, 02:59 PM
#21
Originally Posted by icedout
thats made no sense but good job any way
and because you are asking, you probably do not have the money to take it to a shop capable of making it run 10's
10-01-2005, 03:12 PM
#22
Supporting Maxima.org Member
iTrader: (1)
Join Date: Jan 2003
Location: Bergen County NJ
Posts: 2,124
Originally Posted by MrGone
if you have to ask, you do not have the technical know how to do accomplish getting a maxima to run 10's.
and because you are asking, you probably do not have the money to take it to a shop capable of making it run 10's
and because you are asking, you probably do not have the money to take it to a shop capable of making it run 10's
I guess its like the saying. If you have to ask how much it costs, then you probably cant afford it.
10-01-2005, 05:21 PM
#27
The VQ can't take enough boost or N2O to get you into 10's. Assuming 3100lbs with the driver, you would need 600hp to get it to run app. 10.7 ET.
Let's say you stripped it down and reduce the weight by 500lbs.
2600lbs with the driver would require ONLY 500hp to run 10.7.
2600lbs with 600hp would get you 10.1.
Let's say you stripped it down and reduce the weight by 500lbs.
2600lbs with the driver would require ONLY 500hp to run 10.7.
2600lbs with 600hp would get you 10.1.
10-01-2005, 05:29 PM
#29
Senior Member
Join Date: Aug 2004
Posts: 269
Just go out and buy a jet =) u should be runnin some good times. Wasnt there some1 on here awhile ago that was atempting a RWD conversion? has anyone actually done this
10-01-2005, 05:45 PM
#31
Senior Member
Join Date: Feb 2005
Location: Bartlett, IL
Posts: 3,595
It would require high end tuning from top secret, kei office, amuse, mines, yumekobo, and the yashio factory
10-01-2005, 06:04 PM
#33
Senior Member
Join Date: Nov 2004
Location: RHODE ISLAND
Posts: 355
i dont think any maxima will ever run in the 10s. I was at the track 2nights ago and supercharged mustangs, turbo civics and dsm where owning, these car runing mid 12s along with a group of wrx's that ran low 14s with one redic STI running in the 12s. A couple big bikes ran in the 10s at around 130 mph. A 4 door g35 was ruing 14.8 all night. and a rediculous audi was runnig mid 12., he had virtually no exhaust, a profesionally tuned chip from audi that was amazing, performance injectors and fuel pump............oh ya..and a bi turbo swap from a RS4. Best of all, it was bright yellow and a wagon with 130k
This is him at the end of the race putting his exhaust back together
This is him at the end of the race putting his exhaust back together
10-01-2005, 06:04 PM
#34
Originally Posted by MrGone
if you have to ask, you do not have the technical know how to do accomplish getting a maxima to run 10's.
and because you are asking, you probably do not have the money to take it to a shop capable of making it run 10's
and because you are asking, you probably do not have the money to take it to a shop capable of making it run 10's
I think what he is saying is, if you ask such a question versus taking a few mins to research and find out for yourself, then it will be impossible to get into the 10s, because you wont be trying to figure out a solution rather than expecting one to be given to you.
I think thats what he was trying to say, if not dont mind me.
10-01-2005, 09:17 PM
#38
Supporting Maxima.org Member
Join Date: Mar 2005
Location: Minneapolis,MN
Posts: 737
10s???? WTF
I know it could be done with the VQ ond FWD,
but if I were to do it, it would be RWD conversion
and a small block chevy with an automatic.
yeah, thats right, an auto
I know it could be done with the VQ ond FWD,
but if I were to do it, it would be RWD conversion
and a small block chevy with an automatic.
yeah, thats right, an auto
10-01-2005, 09:20 PM
#39
http://forums.vwvortex.com/zerothread?id=776885
If you violated the maxima like this sentra was violated AND added turbo and nitrous with the 3.5, *MAYBE* you could do 10's.
If you violated the maxima like this sentra was violated AND added turbo and nitrous with the 3.5, *MAYBE* you could do 10's.
10-01-2005, 10:18 PM
#40
Member
Join Date: Feb 2005
Posts: 42
I have been doing a lot of research and let me tell you guys .dont sleep on the VQ30 our rods are so ligth and strong capable of taking up to 500hp bealive it or not my plans are this, fuel presure reg for fuel delivery ,hybrid tubo, intercool with at least 12 to 15 psi and work on traction very important
curelenty i have 2003 H. tiburon rims very lites rims 17's and a small shot of nos may be like 35 to 50 shot, boost contols etc ... hopefully my wife will help me ,i got a good job but also i lot of bills by next summer with God help will be completed... will post pic ,later ... G.R
curelenty i have 2003 H. tiburon rims very lites rims 17's and a small shot of nos may be like 35 to 50 shot, boost contols etc ... hopefully my wife will help me ,i got a good job but also i lot of bills by next summer with God help will be completed... will post pic ,later ... G.R