does anybody have a write up for changing a radiator..and also if u could include the tools i would need..thanks

 

Look at the alternator replacement how-to at www.motorvate.ca. You have to remove/unbolt the radiator to remove the alternator - so everything you need should be there.

 

I see you have a '95 but according to my '98 Service Manual page LC-15:
1. Remove under cover.
2. Drain coolant from radiator.
3. Disconnect radiator upper and lower hoses.
4. Remove radiator shroud.
5. Remove A/T oil cooler hoses. (A/T models only)
6. Disconnect resevoir tank hose.
7. Remove radiator mounting bracket.
8. Remove radiator.
9. After repairing or replacing radiator, install any part removed in reverse order of removal.

There is no mention of Special Service Tools to remove the radiator. There is emphasis when refilling the radiator to not allow coolant to contact the drive belts.

 

thanks alot