Camry343

iTrader: (2)

I got a code for the Knock Sensor and/or Knock Sensor circuit. I changed the knock sensor cleared the code and now the car won't start. I never had any starting issuses before changing the sensor and I've checked over everthing I had unplugged to change it at least three times. I've changed this sensor before on other maximas but, I never had this happen to me, so I'm a bit confused. Could I have done something wrong? There are currently no codes. The car just cranks and cranks but won't start. Any info would greatly help. Thanks.

njmodi

iTrader: (4)

Maybe you left one of the harness connectors unplugged.. go check all the stuff you touched.

Camry343

iTrader: (2)

checked and rechecked. Everything is plugged in.

THEJEFFERATOR

how did you clear the code ? if you turned the ecm screw, did you turn it back?

Camry343

iTrader: (2)

I used my snap-on scanner.

Papa Squat

check your fuses make sure you didnt blow one
happened to me a coupe weeks ago

Camry343

iTrader: (2)

Well with the scanner I made the fuel pump come on, so I know that's working. I'll check the rest of the fuses today.

clifford

Did you get it fixed?

My car won't start either.

I'm a noobie and my account isn't allowing me to create a new thread.

The problem I'm having is:
I turn the key in the ignition and nothing happens. I have electrical power but the starter doesn't even try to turn. I checked all fuses inside the car. I also tried to jump the battery. Still nothing. I'm pretty bummed right now. Seems like there is no signal going to the starter. I don't know what to do. Any ideas? Please help.

Thanks.

njmodi

iTrader: (4)

Do you have power at the starter or you just mean that the car battery is fine and the lights/etc work?

If you don't get any voltage at the starter, then it's most likely the ignition switch.

clifford

The car battery is fine. I get lights, radio, etc...

How do I test voltage to the starter?

clifford

I would do a search in the forum but my account won't allow me. Waiting on activation? I just signed up today.

njmodi

iTrader: (4)

Pull the connector, get a multimeter, turn the key to start and see what you get. And you don't get search privileges without donating.

You can also try give the starter a few whacks and then try to start the car ... that often works.

clifford

Donations -- guess I'll be doing that soon.

If I tap the starter and that fixes it, does that mean the problem was all in the starter or do I still need to explore the ignition switch?

njmodi

iTrader: (4)

If it starts after a bang on the starter it's time for a new starter. If it still doesn't start, then it's still undecided and you'll have to do some further checking.

Try jiggling the key around in the key-slot and see if that works. If that does, then it's most likely the ignition switch.

clifford

Thanks for your input.

This is my first maxima that I just purchased -- used.

Is it normal to have the clutch pressed in order for the car to start? I think I recall having to do this when it was starting. Yes, it's a manual.