New Traction Bar Thread
02-17-2006, 04:30 PM
#44
I wouldn't count on that happening too soon since probably only 20 people have them at the most and most people are not going to sell them unless they part out. It is not like they are that expensive.
02-17-2006, 06:28 PM
#49
Originally Posted by darklegend06
I would order if I only knew how to use paypal, The thing is I have it linked to my bank account, but I don't have money in the paypal account. Any help would be great
You pay Jclaw and the money gets transferred from your bank to his paypal account. You dont need to actually have money in the paypal account, just in your bank. It will take about 3 days to clear, though. Have Fun.
02-17-2006, 06:30 PM
#50
Originally Posted by devilz05
You pay Jclaw and the money gets transferred from your bank to his paypal account. You dont need to actually have money in the paypal account, just in your bank. It will take about 3 days to clear, though. Have Fun.
Thanks a bunch for the info,
02-18-2006, 06:00 AM
#52
Supporting Maxima.org Member
Thread Starter
iTrader: (17)
Join Date: Aug 2004
Location: Montreal, Qc, Canada
Posts: 5,437
(Again added to original post)
DISCLAIMER:
I just want to make sure that everyone is fully aware that I need to order the rod ends first, and it takes 1-2 weeks to get to me, then I can ship it to you. I will keep you guys updated through the process though, and provide tracking numbers if requested.
I assumed the time was right for a group deal since we're in February and most people don't race or drive aggressively until springtime so the downtime wouldn't be that big of an issue.
Also: Please include your .Org username in your Paypal message, so I can keep track of who's who. Last time it got more than slightly confusing.
To keep track of everything, payments I have received so far:
DISCLAIMER:
I just want to make sure that everyone is fully aware that I need to order the rod ends first, and it takes 1-2 weeks to get to me, then I can ship it to you. I will keep you guys updated through the process though, and provide tracking numbers if requested.
I assumed the time was right for a group deal since we're in February and most people don't race or drive aggressively until springtime so the downtime wouldn't be that big of an issue.
Also: Please include your .Org username in your Paypal message, so I can keep track of who's who. Last time it got more than slightly confusing.
To keep track of everything, payments I have received so far:
1) Mymax97
2) NCSU_MAX
3) Dr-Max
4) VQuick (PAID)
5) juani
6) BlackMaxGTR
7) Mr. Duck
8) 95maxrider
9) Drstove
10) Glenmoormax (PAID)
11) Type3max (PAID)
2) NCSU_MAX
3) Dr-Max
4) VQuick (PAID)
5) juani
6) BlackMaxGTR
7) Mr. Duck
8) 95maxrider
9) Drstove
10) Glenmoormax (PAID)
11) Type3max (PAID)
02-18-2006, 02:21 PM
#54
100% chingon
Join Date: Oct 2005
Posts: 1,003
I note that on another site, I can't recall the link, it states that the rear 4-link axle has an integral sway bar that works perfectly well if the stock (crap) bushings are replaced with polyurethane specials, and there's even sources listed for buying these, much cheaper option than a separate RSB. Unfortunatley this I think only works on the (97???) and later because of the suspension design. BUT the damn site didn't explain why the same method can't be used on the 96 rear.... really annoying! Does anyone have any answers?
02-18-2006, 02:28 PM
#55
Supporting Maxima.org Member
Thread Starter
iTrader: (17)
Join Date: Aug 2004
Location: Montreal, Qc, Canada
Posts: 5,437
Rear suspension? 
Anything short of a 100% solid bearing/bushing in all your control arm chassis links wouldn't do as good of a job as a solid bar on both sides. And even in that case you would still have (slight) control arm flex because the maxima LCA isn't exactly the strongest structure known to man. But polyurethane bushings are certainly better than mushy soft stock rubber.
Anything short of a 100% solid bearing/bushing in all your control arm chassis links wouldn't do as good of a job as a solid bar on both sides. And even in that case you would still have (slight) control arm flex because the maxima LCA isn't exactly the strongest structure known to man. But polyurethane bushings are certainly better than mushy soft stock rubber.
02-21-2006, 01:14 PM
#64
Supporting Maxima.org Member
Thread Starter
iTrader: (17)
Join Date: Aug 2004
Location: Montreal, Qc, Canada
Posts: 5,437
Got it .
1) Mymax97
2) NCSU_MAX
3) Dr-Max
4) VQuick (PAID)
5) juani
6) BlackMaxGTR (PAID)
7) Mr. Duck
8) 95maxrider
9) Drstove
10) Glenmoormax (PAID)
11) Type3max (PAID)
2) NCSU_MAX
3) Dr-Max
4) VQuick (PAID)
5) juani
6) BlackMaxGTR (PAID)
7) Mr. Duck
8) 95maxrider
9) Drstove
10) Glenmoormax (PAID)
11) Type3max (PAID)
02-21-2006, 02:58 PM
#66
Supporting Maxima.org Member
Thread Starter
iTrader: (17)
Join Date: Aug 2004
Location: Montreal, Qc, Canada
Posts: 5,437
Got it too.
1) Mymax97
2) NCSU_MAX
3) Dr-Max
4) VQuick (PAID)
5) juani
6) BlackMaxGTR (PAID)
7) Mr. Duck
8) 95maxrider (PAID)
9) Drstove
10) Glenmoormax (PAID)
11) Type3max (PAID)
2) NCSU_MAX
3) Dr-Max
4) VQuick (PAID)
5) juani
6) BlackMaxGTR (PAID)
7) Mr. Duck
8) 95maxrider (PAID)
9) Drstove
10) Glenmoormax (PAID)
11) Type3max (PAID)
02-23-2006, 11:08 AM
#71
Supporting Maxima.org Member
Thread Starter
iTrader: (17)
Join Date: Aug 2004
Location: Montreal, Qc, Canada
Posts: 5,437
Got it.
I've contacted the seller of the rod ends to confirm that they are NF (Fine thread) to match with the machined tubes. When he confirms I will order the 48 bearings and put the machined 26" tubes into production. I also sent PMs to the other members in the GD that I haven't received payment from (although the 12 sets will go into production regardless).
1) Mymax97 (PAID)
2) NCSU_MAX
3) Dr-Max
4) VQuick (PAID)
5) juani
6) BlackMaxGTR (PAID)
7) 95maxrider (PAID)
8) Drstove
9) Glenmoormax (PAID)
10) Type3max (PAID)
11) Dman832 (PAID)
12) ____________ (Last spot available at 169.00$ shipped)
2) NCSU_MAX
3) Dr-Max
4) VQuick (PAID)
5) juani
6) BlackMaxGTR (PAID)
7) 95maxrider (PAID)
8) Drstove
9) Glenmoormax (PAID)
10) Type3max (PAID)
11) Dman832 (PAID)
12) ____________ (Last spot available at 169.00$ shipped)
02-23-2006, 11:57 AM
#77
Supporting Maxima.org Member
Thread Starter
iTrader: (17)
Join Date: Aug 2004
Location: Montreal, Qc, Canada
Posts: 5,437
My best 60' is 1.759. I do hope to break a 1.6 this year. On 24.5 slicks instead of 23's.
The maxima record is held by MardiGrasMax. He pulled a best of 1.71 on his 11.56 run. He was using M&H 24.5X8.5 slicks.
UPDATE: Mr. Duck decided not to keep his position in the Group Deal so there is still one spot available at 169.00$ shipped. Whoever gets it first.
The maxima record is held by MardiGrasMax. He pulled a best of 1.71 on his 11.56 run. He was using M&H 24.5X8.5 slicks.
UPDATE: Mr. Duck decided not to keep his position in the Group Deal so there is still one spot available at 169.00$ shipped. Whoever gets it first.
02-23-2006, 02:16 PM
#80
payment sent from owl8624@hotmail.com