!?Bank1 o2 Sensor?!
#1
!?Bank1 o2 Sensor?!
The guy in autozone told me that the Bank1 o2 Sensor was bad. My check engine light came on. Can anyone tell me which one that is? Does anyone have a diagram of the 3 sensors for my future reference?!
Thanks for the help!
Thanks for the help!
#2
Have you tried searching at all?
Seriously, took 5 seconds.
http://forums.maxima.org/showthread....nk+1+02+sensor
http://www.courtesyparts.com/A32_O2-sensors.html
Seriously, took 5 seconds.
http://forums.maxima.org/showthread....nk+1+02+sensor
http://www.courtesyparts.com/A32_O2-sensors.html
#6
Originally Posted by C MAX
bank 1 is the sensor located behind the passenger side wheel towards the back. bank 2 is located behind the radiator. they are both the same sensor for the fronts.
#7
Originally Posted by 96mAx2fast
I just replaced that one w/ an OEM sensor. The ones I didnt replace are the very front one and the one on the cat. Could it be defective?!
#8
Originally Posted by C MAX
they throw different codes for each one if your not getting any codes i wouldnt worry.
#9
Originally Posted by 96mAx2fast
I am getting a code. My CEL is on. I went to autozone. They said it was Bank1 that was bad !!!
#10
Originally Posted by C MAX
ok so change that one its located on the pipe behind the passenger wheel as stated before. we have three the third is on the pipe after the cat. did you change the one in the front behind the radiator already and how many miles do you have on the car. if your only getting that one code thats the only one you need to change.
#11
Originally Posted by 96mAx2fast
Ok, look, I already changed the one by the passenger wheel about 4 months ago. I havent changed the one in the front nor the one by the cat. According to the autozone guy, the one that I recently changed, is the bad one. How can that be?!
#12
Just saying bank 1 doesnt help... Was it bank 1, sensor 1 or sensor 2?
http://www.jatan.net/02Sensor1.jpg
http://www.jatan.net/02Sensor1.jpg
#14
Originally Posted by 96mAx2fast
I didnt purchase it from autozone, i purchased it from pinnacle nissan. Also, they just said bank 1 is bad. I dont know whether its sensor 1 or 2. All they said was "BANK 1"
BANK2 = front by radiator
third sensor located rear after cat
#15
well, my rear one is actually on my cat. As stated before, i just changed bank 1 and replaced it with a brand new OEM one. Maybe its defective. I will check with another autozone to make sure they are giving me the correct code. I will get back to everyone and let you know what the problem was. Thanks
Thread
Thread Starter
Forum
Replies
Last Post
TallTom
5th Generation Maxima (2000-2003)
50
07-08-2022 09:54 AM
my03maxima
7th Generation Maxima (2009-2015)
8
04-29-2020 12:48 AM
Kyle Lee Cleveland
6th Generation Maxima (2004-2008)
1
09-28-2015 09:01 PM