4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

How can I tell if my car already has an aftermarket y-pipe?

Thread Tools
 
Search this Thread
 
Old Jul 13, 2006 | 09:10 PM
  #1  
gx2nds4's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2005
Posts: 176
How can I tell if my car already has an aftermarket y-pipe?

Well I bought my car used and after changing my air filter and after destroying the box the filter came in i found out that i had a k&n in there already. My friend who rode in my car says that my car pulls harder than his he has a v6 grand am which is supposed to be comparable to ours i think. What should I be looking for when i get under the car?
Old Jul 13, 2006 | 09:16 PM
  #2  
Black Maxima
Guest
 
Posts: n/a
A lot of room around the Y-Pipe.
Old Jul 13, 2006 | 09:18 PM
  #3  
Jatan's Avatar
...
iTrader: (3)
 
Joined: Apr 2003
Posts: 3,324
From: Chicago, IL
Originally Posted by gx2nds4
What should I be looking for when i get under the car?
A y-pipe........
Old Jul 13, 2006 | 09:18 PM
  #4  
gx2nds4's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2005
Posts: 176
are there any underbody pictures of the max i can use for reference
Old Jul 13, 2006 | 09:19 PM
  #5  
gx2nds4's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2005
Posts: 176
Originally Posted by JaTaN
A y-pipe........
whoa whoa whoa slow down with the details. cliffs?
Old Jul 13, 2006 | 09:21 PM
  #6  
Jatan's Avatar
...
iTrader: (3)
 
Joined: Apr 2003
Posts: 3,324
From: Chicago, IL
So lazy... http://cgi.ebay.com/ebaymotors/ws/eB...tem=8049736598
Old Jul 13, 2006 | 09:26 PM
  #7  
gx2nds4's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2005
Posts: 176
Originally Posted by JaTaN

i'd like to know around what part sticks out on my car on the underside. If you're going to act like an *** gtfo out of the thread.
Old Jul 13, 2006 | 09:32 PM
  #8  
DR-Max's Avatar
Senior Member
iTrader: (3)
 
Joined: Jun 2003
Posts: 4,737
Relax newb, he actually helped you by giving you a link to a pic with a stock y and an aftermarket y. Did you actually take the time to click on it and look? Look under your car and see if the pipe matches either one of the pic and there's your answer. One thing noone tolerates here is "spoon-feeding"..........and watch the language!



Originally Posted by gx2nds4
i'd like to know around what part sticks out on my car on the underside. If you're going to act like an *** gtfo out of the thread.
Old Jul 13, 2006 | 10:58 PM
  #9  
96blkonblkse's Avatar
Senior Member
iTrader: (18)
 
Joined: Jul 2003
Posts: 2,862
From: Vancouver
yeah man we cant get more specific, the link showed a pic of stock and aftermarket, go under the car you cant miss it, its right underneeth the middle of the car, just follow the pipeing that comes out of the muffler all the way to the front of the car. if it looks like the warpspeed one then its aftermarkt, if it looks old and rust like the stock one in the pic then it is indeed stock.
Old Jul 14, 2006 | 02:12 AM
  #10  
gx2nds4's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2005
Posts: 176
Originally Posted by 96blkonblkse
yeah man we cant get more specific, the link showed a pic of stock and aftermarket, go under the car you cant miss it, its right underneeth the middle of the car, just follow the pipeing that comes out of the muffler all the way to the front of the car. if it looks like the warpspeed one then its aftermarkt, if it looks old and rust like the stock one in the pic then it is indeed stock.
thanks for everything, but i was looking for something like this.



Originally Posted by DR-Max
Relax newb, he actually helped you by giving you a link to a pic with a stock y and an aftermarket y. Did you actually take the time to click on it and look? Look under your car and see if the pipe matches either one of the pic and there's your answer. One thing noone tolerates here is "spoon-feeding"..........and watch the language!
i bought it from that auction of course i saw that picture. He comes in the thread and doesn't post anything useful at first of course i'll respond like that. If you don't have anything useful to say "a y-pipe..." why say anything at all.
Old Jul 14, 2006 | 04:23 AM
  #11  
MaximaSE96's Avatar
Maxima Owner
iTrader: (8)
 
Joined: Jun 2003
Posts: 5,036
maximas pull harder than Grand Ams all day in stock form
Old Jul 14, 2006 | 05:25 AM
  #12  
gx2nds4's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2005
Posts: 176
Originally Posted by MaximaSE96
maximas pull harder than Grand Ams all day in stock form
good to know. I guess I shouldn't have based it on magazine times
Old Jul 14, 2006 | 05:40 AM
  #13  
MaximaSE96's Avatar
Maxima Owner
iTrader: (8)
 
Joined: Jun 2003
Posts: 5,036
as close as they look on paper....in terms of motor....the Grand Ams 3.4 liter has 175 bhp...dotn know torque...and the the maxima has 190 bhp and 205 ft lbs of torque on a smaller lighter engine....the overall car is also significantly ligher than a Grand Am...grand ams are like 3300lbs and 5sp maximas are advertised as 3010 give or take for diff options...i pull them on a daily basis in my area and i am stock when it comes to motor
Old Jul 14, 2006 | 05:43 AM
  #14  
gx2nds4's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2005
Posts: 176
Originally Posted by MaximaSE96
as close as they look on paper....in terms of motor....the Grand Ams 3.4 liter has 175 bhp...dotn know torque...and the the maxima has 190 bhp and 205 ft lbs of torque on a smaller lighter engine....the overall car is also significantly ligher than a Grand Am...grand ams are like 3300lbs and 5sp maximas are advertised as 3010 give or take for diff options...i pull them on a daily basis in my area and i am stock when it comes to motor
actually grand ams are around 3000 with 175/205 I breifly looked at them when I was car shopping. They seemed like a cheap alternative but after looking at crash test ratings I quickly looked away. I think my car is pretty heavy though 97+ , gle, and side airbags. But this little tidbit makes me smile
Old Jul 14, 2006 | 05:54 AM
  #15  
MaximaSE96's Avatar
Maxima Owner
iTrader: (8)
 
Joined: Jun 2003
Posts: 5,036
maximas look heavy but arent really considering they are a fully size car
Old Jul 14, 2006 | 06:23 AM
  #16  
gx2nds4's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2005
Posts: 176
Originally Posted by MaximaSE96
maximas look heavy but arent really considering they are a fully size car
just went outside to go check and yeah she has the stock y-pipe on. The cat looks rusted pretty bad though. I wonder if that'll be a problem for installing the y-pipe.
Old Jul 14, 2006 | 06:32 AM
  #17  
Caracicatriz's Avatar
What was that?
iTrader: (3)
 
Joined: Nov 2002
Posts: 1,120
From: Philadelphia, PA
It will be a problem. torch them off!
Old Jul 14, 2006 | 06:42 AM
  #18  
MaximaSE96's Avatar
Maxima Owner
iTrader: (8)
 
Joined: Jun 2003
Posts: 5,036
Originally Posted by Caracicatriz
It will be a problem. torch them off!
i agree....although i am not a big fan of hi-flow cats cause they do nothing really....if its rusted and poopy just get an ebay one and torch it off and start fresh when u put the y-pipe on
Old Jul 14, 2006 | 07:00 AM
  #19  
gx2nds4's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2005
Posts: 176
http://cgi.ebay.com/ebaymotors/2-1-2...08459386QQrdZ1

is 60 bucks considered cheap? the really cheap ones seem to just be test pipes.
Old Jul 14, 2006 | 10:16 AM
  #20  
Prophecy1's Avatar
Supporting Maxima.org Member
 
Joined: Mar 2004
Posts: 1,132
Originally Posted by gx2nds4
i'd like to know around what part sticks out on my car on the underside. If you're going to act like an *** gtfo out of the thread.
If your going to inconsiderate and not use the forums and the stickies you GTFO of the forums

That guy did all the work for you
Old Jul 14, 2006 | 10:23 AM
  #21  
scubasteve's Avatar
OHHH YEA SCISSOR!!!!
iTrader: (6)
 
Joined: Jul 2006
Posts: 1,424
From: Cape Coral, FL
If you don't have anything useful to say "a y-pipe..." why say anything at all.
if you dont take the time to look for obvious answers and then attack at a member who tries to help you than expect flames.
Old Jul 14, 2006 | 10:28 AM
  #22  
Caracicatriz's Avatar
What was that?
iTrader: (3)
 
Joined: Nov 2002
Posts: 1,120
From: Philadelphia, PA
Originally Posted by gx2nds4
gtfo out of the thread.
Same word used twice in a row row.
Old Jul 14, 2006 | 01:20 PM
  #23  
Fr33way™'s Avatar
Wild for Width
iTrader: (23)
 
Joined: Jan 2005
Posts: 6,471
From: Atlanta
You know you have a y-pipe if......
Old Jul 14, 2006 | 01:21 PM
  #24  
Fr33way™'s Avatar
Wild for Width
iTrader: (23)
 
Joined: Jan 2005
Posts: 6,471
From: Atlanta
1.) you have been a member of Maxima.org for longer than 3 days
Old Jul 14, 2006 | 06:51 PM
  #25  
Black Maxima
Guest
 
Posts: n/a
...if you are pwnin n00bs if they haven't been on the org more than three days.
Old Jul 17, 2006 | 07:44 AM
  #26  
99max78210's Avatar
Junior Member
 
Joined: May 2006
Posts: 20
You have one if you dont see a bunch of aluminum armor between the exhaust manifold and the cat. If you see armour, youre stock.
Old Aug 27, 2006 | 01:03 PM
  #27  
twoconfusedants's Avatar
Supporting Maxima.org Member
iTrader: (1)
 
Joined: Jan 2006
Posts: 65
if it was replaced... and its ss, it wont be rusty... :-P
Old Aug 27, 2006 | 01:14 PM
  #28  
Black Maxima
Guest
 
Posts: n/a
Bringing it back from the dead.
Old Sep 24, 2006 | 11:19 AM
  #29  
dovetailguy's Avatar
Newbie - Just Registered
 
Joined: Mar 2006
Posts: 11
Y pipe

An aftermarket Y pipe will not have the catalytic convertors, which are used before the car is warmed up.
Old Sep 24, 2006 | 11:36 AM
  #30  
Cdg2125's Avatar
Senior Member
iTrader: (7)
 
Joined: May 2004
Posts: 4,622
From: CT


what are you talking about?
Old Sep 24, 2006 | 11:47 AM
  #31  
gx2nds4's Avatar
Thread Starter
Senior Member
 
Joined: Oct 2005
Posts: 176
Originally Posted by Fr33way™
1.) you have been a member of Maxima.org for longer than 3 days
this has been such a useful comment please /yourself thanks
Old Sep 24, 2006 | 12:26 PM
  #32  
bigpulve+'s Avatar
Supporting Maxima.org Member
iTrader: (11)
 
Joined: Apr 2006
Posts: 11,656
From: Vermont
I will have to agree with fr33way on that one. I was on here 1 day and wanted a Y pipe like I wanted a small asian hooker on a Thursday night before pay day. So before you start attacking very respected members of this forum you should be ready to be flamed beyond anything and realize EVERYONE will attack you and NO ONE will defend you. Now please shut up and listen instead of mouthing off.
Old Sep 24, 2006 | 12:49 PM
  #33  
ethnic6's Avatar
Senior Member
iTrader: (5)
 
Joined: Jan 2005
Posts: 3,134
I Shall Defend Him!!!

... .......

I'm out numbered.

Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lakersallday24
6th Generation Maxima (2004-2008)
10
Jun 16, 2019 01:35 AM
Greenmaxspeed
4th Generation Classifieds (1995-1999)
6
Aug 31, 2015 09:06 PM
stromm
4th Generation Maxima (1995-1999)
15
Aug 27, 2015 04:13 PM
MaximaDrvr
7th Generation Maxima (2009-2015)
16
Aug 19, 2015 08:20 PM
PhalC1
6th Generation Classifieds (2004-2008)
1
Aug 5, 2015 02:36 PM




All times are GMT -7. The time now is 09:06 AM.