LED Tail Lights
#1
LED Tail Lights
OK, plain and simple. I know there's been a few people on here that have done them, but is anybody willing to do them for some $$$...? I do not have the time, nor patience to do this mod myself, which is one I've been dying to have. All I need is the outer tails done, being the only lights on my trunk will be reverse and those can stay normal Hyperwhite Bulbs as well as the turn signals.
So, for somebody that's done them and feels like making a lil money on the side, rather quickly too cuz all I want is the red (parking/brake lights) done only...then please PM me ASAP. Thanks.
So, for somebody that's done them and feels like making a lil money on the side, rather quickly too cuz all I want is the red (parking/brake lights) done only...then please PM me ASAP. Thanks.
#2
Originally Posted by Max Mutes
OK, plain and simple. I know there's been a few people on here that have done them, but is anybody willing to do them for some $$$...? I do not have the time, nor patience to do this mod myself, which is one I've been dying to have. All I need is the outer tails done, being the only lights on my trunk will be reverse and those can stay normal Hyperwhite Bulbs as well as the turn signals.
So, for somebody that's done them and feels like making a lil money on the side, rather quickly too cuz all I want is the red (parking/brake lights) done only...then please PM me ASAP. Thanks.
So, for somebody that's done them and feels like making a lil money on the side, rather quickly too cuz all I want is the red (parking/brake lights) done only...then please PM me ASAP. Thanks.
Here ya go...
http://forums.maxima.org/showthread.php?p=5112393
#6
It honestly isn't that hard to make. In my electronics class at school we put together boards like this all the time, even alot more complicated. All you need is the materials and a rainy afternoon not even. 2 Hours tops it should take if you're retarded.
#7
Originally Posted by Garrick
It honestly isn't that hard to make. In my electronics class at school we put together boards like this all the time, even alot more complicated. All you need is the materials and a rainy afternoon not even. 2 Hours tops it should take if you're retarded.
#8
Originally Posted by HomerMAC
... a bit more than 2hrs... dont downplay the work and the difficulty....
#11
It took me a little under 45 minutes to make an AC to DC transformer. That's not including the time it took to wait for me to draw the board, dissolve it in the acid, and drill the holes where it needed to go. That part took at least an hour.
#13
Originally Posted by Garrick
Well what is it? Snip the PCB to fit in the light housing, and then solder on the components. I was talking about that. The actual wiring to the tail-lights shouldn't be that hard either. Again, unless you're retarded.
You're the only one in this thread who can be appropriately labled "retarded"...
#14
Of all the led's I've seen, the best ones are the Cadillac, probably the STS. I guess they were the original and seem to be ahead of anyone, incl. the Germans. Something about the fact that they are not perfectly straight but going in a curve is very aesthetic. The opposite look would be the G35. The M35/45 also not good-looking as it's a perfect circle. It's like a photo with the subject smack-dab in the center, very uninteresting....
#15
Originally Posted by D-Bo
You're the only one in this thread who can be appropriately labled "retarded"...
#20
Originally Posted by Garrick
Okay, I love the sound of a challenge.
Make me eat my words...I IMPLORE you to do so.
One hour for design and assembly. GO.
#21
Originally Posted by Garrick
And why is that? Because I can put together a "complicated" breadboard with LED's on it in under an hour?
You must mean an hour per taillight, because it is damn near impossible to do a single taillight in under an hour. You are one of the biggest **** talkers I have ever seen.
#29
Originally Posted by Garrick
It took me a little under 45 minutes to make an AC to DC transformer. That's not including the time it took to wait for me to draw the board, dissolve it in the acid, and drill the holes where it needed to go. That part took at least an hour.
#30
Originally Posted by Garrick
[IMG]http://img117.imageshack.us/img117/254/dsc00561jl3.jpg[IMG]
Well I bought the boards and some Hyperwhite LED's for the reverse lights. They didn't have enough Reds.
[IMG]http://img154.imageshack.us/img154/4760/dsc00562hs3.jpg[IMG]
I think I need more whites though, what do you think Kevlo?
Well I bought the boards and some Hyperwhite LED's for the reverse lights. They didn't have enough Reds.
[IMG]http://img154.imageshack.us/img154/4760/dsc00562hs3.jpg[IMG]
I think I need more whites though, what do you think Kevlo?
Yes more resizing
And with your free time remove the rear package tray brake light, speaker grill, key marks and dirt from your car.
#31
#33
Originally Posted by Frank Fontaine
Of all the led's I've seen, the best ones are the Cadillac, probably the STS. I guess they were the original and seem to be ahead of anyone, incl. the Germans. Something about the fact that they are not perfectly straight but going in a curve is very aesthetic. The opposite look would be the G35. The M35/45 also not good-looking as it's a perfect circle. It's like a photo with the subject smack-dab in the center, very uninteresting....
#34
Originally Posted by Kevlo911
Do it PLEASE. I beg you to.
Not that it matters, I'm too lazy to get in on this, I don't even have a 4th gen
#35
Originally Posted by Killer99max
You must mean an hour per taillight, because it is damn near impossible to do a single taillight in under an hour. You are one of the biggest **** talkers I have ever seen.
#36
Originally Posted by Metal Maxima
You will have NO problem selling them.
#37
Originally Posted by Kevlo911
Resize those pics. And I prob wouldnt get more. I am lazy tho. If you have the time, add more.