4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

clutch binding noise

Thread Tools
 
Search this Thread
 
Old 09-11-2006, 01:42 PM
  #1  
Senior Member
Thread Starter
 
nismo-max500's Avatar
 
Join Date: Jul 2002
Posts: 350
clutch binding noise

sometimes, not all the time. When i release the clutch in 1st (only 1st) i get this sound as if theres something rubbing. the sound sounds like a metal echo sound, like something is rubbing but causing a lot of noise. I know this is hard to describe but if anyone has anything similar to this please mention it! thanks

P.S. the clutch was replaced recently along w/ two front axles.
nismo-max500 is offline  
Old 09-11-2006, 06:15 PM
  #2  
Supporting Maxima.org Member
 
scrhale's Avatar
 
Join Date: Dec 2004
Location: Atlanta, GA
Posts: 1,183
Does it sound like you lined up a bunch of wood beams and ran down the row really fast with a baseball bat. Thus a very fast thunk thunk thunk thunk ... like a minimum of 20 times within 3-4 secs? I got it too and don't know what it is. I think it means uneven clutch surface. Expert please chime in.
scrhale is offline  
Old 09-11-2006, 07:12 PM
  #3  
Senior Member
Thread Starter
 
nismo-max500's Avatar
 
Join Date: Jul 2002
Posts: 350
Originally Posted by scrhale
Does it sound like you lined up a bunch of wood beams and ran down the row really fast with a baseball bat. Thus a very fast thunk thunk thunk thunk ... like a minimum of 20 times within 3-4 secs? I got it too and don't know what it is. I think it means uneven clutch surface. Expert please chime in.
yea, id say thats the best sound description, sorta a metal thud like a baseball bat, or wood thud. except mine is a slower sound and it only happens once. its one thunk that is slow, as if if u took the sound on the computer and slowed it down digitally. its almost like a squeak except it doesnt squeak, it makes that metal sound slowly. This is getting really indepth! haha, hopefully someone can give some insight.
nismo-max500 is offline  
Old 09-11-2006, 10:49 PM
  #4  
Junior Member
 
slolankan's Avatar
 
Join Date: Jul 2003
Posts: 27
i have the same problem.. its gotten a LOT worst than it used to be.. think its time for a new clucth and flywheel or atleast a good resurfacing job....
slolankan is offline  
Old 09-12-2006, 04:04 AM
  #5  
Supporting Maxima.org Member
 
scrhale's Avatar
 
Join Date: Dec 2004
Location: Atlanta, GA
Posts: 1,183
Just to state the facts, I have the stock flywheel (never resurfaced) and the stock clutch at 146K. I have put her through a couple of spirited drives, but I am pretty sure the previous owner didn't since he was older. I purchased the car with 143K.
scrhale is offline  
Old 09-12-2006, 04:34 AM
  #6  
4th gen <3
iTrader: (2)
 
boostlogic's Avatar
 
Join Date: Feb 2006
Posts: 187
Could be the throw-out bearing, sounds like a similiar sound before I upgraded to 6puck.
boostlogic is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hcarter1112
5th Generation Maxima (2000-2003)
42
07-18-2022 03:35 PM
aw11power
Supercharged/Turbocharged
161
10-10-2021 04:57 AM
D Mason
8th Generation Maxima (2016-)
1
06-21-2016 04:43 AM
uttadms31
4th Generation Maxima (1995-1999)
2
09-30-2015 05:24 AM



Quick Reply: clutch binding noise



All times are GMT -7. The time now is 03:09 AM.