If anyone can help me out, I sure would appreciate it.... I need to know which wire would inform the MSI switch of the engine RPM so that my MEVI actuates / switches.

 

ECU yo......pin 5 its white and green wire

 

Thanks alot MaximaSE96


You are da man!

 

some people also use the tach wire on the back of the gauge cluster....

 

Wait, is it the green and white wire off the harness or the green one? The picture says green, and the people have said green and white. Is it green for a 97 and green and white for a 96?

Thanks again

 

dunno 96 could be different than 97.....try to find that pin while looking at the harness

 

It will be some combination of green and white. I believe mine was white with a little green stripe, and I'm a '95...but I'm not sure about 96's.

 

Uh.. its definately white and green then? Does anyone think its solid green? Sorry but Im not totally clear.

I havent messed around with the harness and tried to find the wire coming out of pin 5, Im not sure but I think that would be difficult to do, (im thinking) would it be easier to get a definate answer on the wire and just tap into it... Agh, well probably will get there eventually. Thanks all who are helping out. Anyone do this with a 96?

**EDIT**
It really sounds like a white wire with green stripe... WOOT! Thanks again everyone